Automotive Forums .com - the leading automotive community online! Automotive Forums .com - the leading automotive community online!
Automotive Forums .com - the leading automotive community online! 
-
Latest | 0 Rplys
Go Back   Automotive Forums .com Car Chat > Chevrolet > Blazer > Problem Diagnosis
Register FAQ Community Arcade Calendar
Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible.
Reply Show Printable Version Show Printable Version | Email this Page Email this Page | Subscription Subscribe to this Thread
 
Thread Tools
Old 02-03-2016, 07:35 PM   #1
OldBlue727
AF Newbie
 
Join Date: Feb 2016
Location: Clearwater, Florida
Posts: 4
Thanks: 2
Thanked 0 Times in 0 Posts
1986 Chevy Astro Van CL 4.3

Hello all!!! new to the AF, and glad to be here. I have a 1986 Astro van that has a lifter noise when at operating temp only at idle. goes away and runs fine off idle. have be told its probably SLUDGE...suggestions? 4.3l
OldBlue727 is offline   Reply With Quote
Old 02-04-2016, 07:21 AM   #2
Blue Bowtie
Registered Offender
 
Blue Bowtie's Avatar
 
Join Date: Mar 2006
Location: Rural
Posts: 6,518
Thanks: 6
Thanked 341 Times in 336 Posts
Re: 1986 Chevy Astro Van CL 4.3

Welcome Aboard!

Connect a mechanical gauge to the port at the rear ledge, front ledge above the timing cover, or plug above the oil filter base (whichever is most convenient on an Astro) and monitor oil actual pressure from start until the engine is fully warmed. Anything below 10-12 PSI could be a reason for concern.

If pressure is at least 15 PSI warm it may be a case of sludge accumulation affecting oil delivery to the lifter banks, varnished lifters not holding oil, or other possibilities. My guess is that the hot pressure will be low, which is not necessarily a sludge issue.
__________________
Permanent seat assignment on the Group W bench...
Automotive Forums Survival Guide
Blue Bowtie is offline   Reply With Quote
The Following User Says Thank You to Blue Bowtie For This Useful Post:
OldBlue727 (02-04-2016)
Old 02-04-2016, 07:14 PM   #3
OldBlue727
AF Newbie
Thread starter
 
Join Date: Feb 2016
Location: Clearwater, Florida
Posts: 4
Thanks: 2
Thanked 0 Times in 0 Posts
Re: 1986 Chevy Astro Van CL 4.3

Quote:
Originally Posted by Blue Bowtie View Post
Welcome Aboard!

Connect a mechanical gauge to the port at the rear ledge, front ledge above the timing cover, or plug above the oil filter base (whichever is most convenient on an Astro) and monitor oil actual pressure from start until the engine is fully warmed. Anything below 10-12 PSI could be a reason for concern.

If pressure is at least 15 PSI warm it may be a case of sludge accumulation affecting oil delivery to the lifter banks, varnished lifters not holding oil, or other possibilities. My guess is that the hot pressure will be low, which is not necessarily a sludge issue.
Thanks for the info will check oil pressure and let you know what I find...
OldBlue727 is offline   Reply With Quote
Old 02-04-2016, 07:27 PM   #4
OldBlue727
AF Newbie
Thread starter
 
Join Date: Feb 2016
Location: Clearwater, Florida
Posts: 4
Thanks: 2
Thanked 0 Times in 0 Posts
Re: 1986 Chevy Astro Van CL 4.3

Quote:
Originally Posted by OldBlue727 View Post
Thanks for the info will check oil pressure and let you know what I find...
btw have been researching new oil pumps and I can get this one from local parts store.
Melling High Volume Oil Pump
Part No. M-55HV

ebay is selling this.

Melling Select 10550 Chevy Oil Pump Performance...race car app. I assume...

if it boils down to an oil pump problem/pressure relief valve I'm sure the local parts store will be fine...

thanks again for your help
OldBlue727 is offline   Reply With Quote
Old 02-05-2016, 05:23 AM   #5
rhandwor
AF Enthusiast
 
Join Date: Sep 2006
Location: Athens, Georgia
Posts: 4,662
Thanks: 0
Thanked 64 Times in 64 Posts
Re: 1986 Chevy Astro Van CL 4.3

Quote:
Originally Posted by OldBlue727 View Post
btw have been researching new oil pumps and I can get this one from local parts store.
Melling High Volume Oil Pump
Part No. M-55HV

ebay is selling this.

Melling Select 10550 Chevy Oil Pump Performance...race car app. I assume...

if it boils down to an oil pump problem/pressure relief valve I'm sure the local parts store will be fine...

thanks again for your help
In older vehicles the main reason for low oil pressure is either a plugged strainer or worn bearings.
rhandwor is offline   Reply With Quote
The Following User Says Thank You to rhandwor For This Useful Post:
OldBlue727 (02-05-2016)
Old 02-05-2016, 06:39 PM   #6
OldBlue727
AF Newbie
Thread starter
 
Join Date: Feb 2016
Location: Clearwater, Florida
Posts: 4
Thanks: 2
Thanked 0 Times in 0 Posts
Re: 1986 Chevy Astro Van CL 4.3

Quote:
Originally Posted by rhandwor View Post
In older vehicles the main reason for low oil pressure is either a plugged strainer or worn bearings.
gonna drop the pan and inspect/replace strainer clean pan etc etc...
OldBlue727 is offline   Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums .com Car Chat > Chevrolet > Blazer > Problem Diagnosis


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 01:53 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts