Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
08-30-2014, 10:45 AM | #1 | |
AF Regular
Join Date: May 2003
Location: Alma, Michigan
Posts: 348
Thanks: 0
Thanked 0 Times in 0 Posts
|
no brights when lever pressed forward... lights shut off?
2008 SS... Ok if I pull lever back I have brights... and I let go I have my normal lights. I push lever forward for continious brights my parking lamps are the only thing on? I'm completely stumped! I even replaced stalk, same issue. I've searched high and low to find an answer I can't find squat.
Wow... 8 years since my last visit to site |
|
08-30-2014, 01:23 PM | #2 | |
AF Fanatic
Join Date: Jul 2011
Location: Worcester, Massachusetts
Posts: 5,017
Thanks: 70
Thanked 618 Times in 610 Posts
|
Re: no brights when lever pressed forward... lights shut off?
If your flash to pass works(both hi beams), but when you switch to hi beams they don't, then you would think it's the multifunction switch....but is that what you already replaced?
If it is, then you either have a bad circuit(open) between the multifunction switch and the BCM, or a bad BCM.... |
|
08-30-2014, 01:59 PM | #3 | |
AF Regular
Thread starter
Join Date: May 2003
Location: Alma, Michigan
Posts: 348
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: no brights when lever pressed forward... lights shut off?
ugh and I heard the BCM is expensive to fix. Good grief... yes I replaced the whole switch and it continues to still frustrate me
|
|
08-30-2014, 08:21 PM | #4 | |
AF Fanatic
Join Date: Jul 2011
Location: Worcester, Massachusetts
Posts: 5,017
Thanks: 70
Thanked 618 Times in 610 Posts
|
Re: no brights when lever pressed forward... lights shut off?
You will need a schematic to check the circuits between the multifunction switch and the BCM......you don't want to put a BCM in for nothing....
|
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|