Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
03-18-2009, 01:49 AM | #1 | |
AF Newbie
Join Date: Mar 2009
Location: San Diego, California
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
1998 Navigator cranks but won't start
I am new to this site and would greatly appreciate any advice with my problem. I have a 98 4x4 Navi with a no start problem. I have installed a new fuel pump, coils and injectors and everything was fine until it stalled on the freeway and would not start again. It had no spark but fuel pump worked fine. I noticed a 30amp fuse had burnt out and replaced it and it worked fine again for about a week or two, now it burnt again keeps burning it out, its the last fuse on the third row bottom (# 30 in the box), its the fuse panel inside the car and I have no clue what it is for or why it keeps burning. Any ideas on what the fuse is for? I have been told that it could be the computer causing the problem. I would like to know if anyone has an idea on what it could be or where to find a diagram of the fuse box and what each fuse controls . Tnks
|
|
03-21-2009, 02:11 PM | #2 | |
AF Enthusiast
Join Date: Oct 2002
Location: So. California, California
Posts: 2,204
Thanks: 0
Thanked 3 Times in 3 Posts
|
Re: 1998 Navigator cranks but won't start
Without looking at your fusebox layout.. it's been my experience that every box has a map on the cover.. a 30A fuse inside the cabin is unheard of in my circles, maybe I just need to get out more.
The cover should have a map, description, and amp rating for every fuse. You can get a 1998 Ford Trucks FSM off my home page. <edit> My Bad.. I see 30's #30 30A Radio Noise Capacitor, PCM Power Diode, Coil on Plugs, PCM Power Relay, SecuriLock </edit> You can see your owners manual too: (page 120 has this fuse) http://www.motorcraftservice.com/pub.../98navog1e.pdf
__________________
-Steven 1996 Town Car, Cartier Last edited by Towncar; 03-21-2009 at 02:24 PM. Reason: new information, |
|
03-21-2009, 05:49 PM | #3 | |
AF Newbie
Thread starter
Join Date: Mar 2009
Location: San Diego, California
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1998 Navigator cranks but won't start
Tnks for your help, As for the cover on the fuse box, when I purchased the Navi it was missing the cover so I have no idea what each fuse controls, my problem is that it keeps blowing the #30 fuse I had the relay checked and they say it alright. So I am guessing I will end up changing the powertrain control module to see if it works. Tnks
|
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|