Help!! I need 1 Epsilon 15x6" (3 piece)

[wally059]

I tried looking for this 3 piece Epsilon Rim, but didn't find any, does anybody knows some other places maybe I didn't look in the right ones.

Thanks for any info.

(1983 320i - 1.8 engine)

[Luke@tirerack]

even though the center cap says Epsilon it may have been made by another company .... take the wheel off and see if there is any markings on the backside of the wheel to identify who actually made the wheel. It might give you other avenues to find just 1 ..... I do not know of any company carrying those wheels

[wally059]

You might be right, because this rims on the back says that they were made in Japan and the numbers I see are the following:

PCD G2500A JJx1 OFF

I hope this is of any help and thanks for answering.

[sprinter-ae86]

Need help locating epsilon wheels dealer/manufacturer in USA. Need some new half rings and don't know where to find them.

[Shaun1]

I cant find a site for them, but might try talking to Guldstrand Engineering... They did alot of work to my 68 Camaro...Including 16 x8 3pc Epsilon Rims with special off set They might be able to let you know of the original maker of the rims or a place to get your half rings you need ...They have been around since the 60's racing camaros and vettes..I will be contacting them as well to see where i need to get half rings for my car.
I will post back with any additoinal info on this

Ps That work was done in the late 80's could be a discontinued line item but half rings should avail some how

[dannysoliz]

I happen to have a set of epsilons with the reverse offset. They are 15x8 and in very good condition. Can anyone give me an idea of where I may be able to unload these . They have been sitting in my garage for years.

[sprinter-ae86]

e-mail me at ian@sprinter-ae86.com with the PCD (bolt Patern) and the halves measurement.

Center to outer half and center to inner half.

Ian

[Blwnnova72]

Hi i seen your add and I have a whole set of 3 piece epsilon rims. Let me know if your interested.

[Blwnnova72]

I have a set of those rims that you all were talking about. They have been in my basement for years and I actually forgot about them. They are just sitting there collecting dust and taking up room. They are in good shape though. If anyone has any info on who to try and get rid of them to let me know. Thanks

[camocarl]

Im looking for a set of Epsilons. email me at camocarl@aol.com. I may buy a set off you! Carl

[montageone]

Originally Posted by Blwnnova72

I have a set of those rims that you all were talking about. They have been in my basement for years and I actually forgot about them. They are just sitting there collecting dust and taking up room. They are in good shape though. If anyone has any info on who to try and get rid of them to let me know. Thanks

..........DO YOU STILL HAVE THE EPS??

[BillGalbraith]

I am about to have a quantity of Epsilon wheel caps manufactured out of aluminum, 2.34 inches in diameter. COst will be about $100-$120 a set. If you are interested, see:

www.holycows.net/EpsilonCaps.html

Bill