93 Legacy CKS and CMS troubleshooting

[againstk]

Hello there,

I've been seeking some help with my 93 legacy. It stalled last month, and wont start. It' an old car and I don't have the money to take it to shop, especially in the area I live in.. it's a fortune.

After doing plenty of trial and error work on it.. I've been narrowed down to the crank sensor and the cam sensor. Basically my engine turns and turns and wont start.

Timing belt is ok
Coil Pack is ok
Brand new battery
Fuel is fine too


I don't know how to check the sensors, I'm trying to figure out which one may be the problem so I can replace it. I've been told perhaps I can check their voltage and resistance somehow. I can't hook the car up to a scanner because it's too old. Any help I can get on how to check and determine which sensor could be preventing my engine from firing up, would be greatly appreciated.

Thanks!

[legacy 93]

under your dash take 4 screw out you'll see two green plugs and two black ones .The two green ones you can plug together for a code (your engine light will blink short blinks are one and long blinks are 10 to find out the code . then check the internet for subaru code's