Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
07-29-2015, 03:37 PM | #1 | |
AF Newbie
Join Date: Jul 2015
Location: Ramsey, Minnesota
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
95 Voyager Timing Marks Alignment 3.0
I put a new water pump and timing belt on my voyager but moved the timing in the process. I can get the marks on the crank and front cam aligned, but the rear cam sprocket will not stop on the stationary mark. It springs past the mark by about two inches. How do I get the sprocket to stop on the stationary mark?
|
|
08-08-2015, 07:36 AM | #2 | |
AF Newbie
Thread starter
Join Date: Jul 2015
Location: Ramsey, Minnesota
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 95 Voyager Timing Marks Alignment 3.0
Never mind. I figured it out. I was using a ratchet when I should have been using a pull handle. The van is back together and runs great. No drips. No runs. No errors.
Gary |
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|