Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
02-13-2008, 01:46 PM | #1 | |
AF Newbie
Join Date: Feb 2008
Location: asd
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
2000 Alero Blower/resistor replacement
Hi, I have read through some threads on here and I think I have a problem with either my blower motor or resistor... I started my car and the blower was making almost a gurgling sound and after i turned it off and turned it on it didn't start up at all... after 5 mins of driving i tried it again and it turned on, but i had it on high and was blowing relatively slow... i got on the highway and it seemed to be running pretty good, not 100% but pretty good. but now the problem is getting worste and i am not sure if this could be the motor itself or the resistor. Another question i have is i know i can find the resistor under the passenger side foot rest but what does it look like and is the motor next to the resistor of in a different place?
thanks |
|
02-13-2008, 06:04 PM | #2 | |
out saving the world
Join Date: Jul 2005
Location: Yourtown, Indiana
Posts: 10,707
Thanks: 8
Thanked 18 Times in 18 Posts
|
Re: 2000 Alero Blower/resistor replacement
Welcome to AF.
You might want to inspect the blower, could have leaves or a varmit campin out causing it not to operate. If you resistor is bad it would only blow on HIGH. Here's a thread that shows you where its located and has a few pics. Blower Motor & Resistor Removal - 99+ Grand Am ps- it says Grand am, but its the same as your Alero.
__________________
1999 Grand Am SS 3.4 OHV |
|
02-18-2008, 08:17 PM | #3 | |
AF Newbie
Thread starter
Join Date: Feb 2008
Location: asd
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 2000 Alero Blower/resistor replacement
cool thanks, i believe the blower just crapped out, although when i pulled it out there was one crinkly leaf in it, i replaced the blower.... after a few twists and turns... and it works now, thanks for the help
|
|
|
POST REPLY TO THIS THREAD |
|
|