 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
08-09-2014, 01:35 AM
|
#1 | |
|
AF Newbie
Join Date: Sep 2011
Location: Betlehem, Pennsylvania
Posts: 29
Thanks: 10
Thanked 0 Times in 0 Posts
|
2008 Mazda 3 code P2274
I have a code P2274 popping up on my 08 mazda 3 Gt (2.3L) and have changed the forward oxygen sensor to try to correct and this did not work. Light has not come on, but code does appear on scanner. They say this means: oxy sensor stuck lean (bank 1-sensor 3). Has anyone corrected this code and were do I go from here???
 Last edited by gorent; 08-09-2014 at 01:38 AM. Reason: spelling |
|
|
|
|
08-09-2014, 02:23 AM
|
#2 | |
|
AF Moderator
 
Join Date: Oct 2004
Location: Bellingham, Washington
Posts: 1,751
Thanks: 0
Thanked 73 Times in 73 Posts
|
Re: 2008 Mazda 3 code P2274
sensor 3 would be the one rearward of the cataltetic convertor
|
|
|
|
|
|
08-09-2014, 08:26 AM
|
#3 | |
|
AF Newbie
Thread starter
Join Date: Sep 2011
Location: Betlehem, Pennsylvania
Posts: 29
Thanks: 10
Thanked 0 Times in 0 Posts
|
Re: 2008 Mazda 3 code P2274
Thank you! They say there are only two oxy sensor's on this model, that is why i changed the forward one first. I will check out rear one next and hope that is it. I do not have any exaust or intake leaks I can find! Thanks again!
 Last edited by gorent; 08-20-2014 at 01:22 PM. |
|
|
|
|
|
08-20-2014, 01:25 PM
|
#4 | |
|
AF Newbie
Thread starter
Join Date: Sep 2011
Location: Betlehem, Pennsylvania
Posts: 29
Thanks: 10
Thanked 0 Times in 0 Posts
|
Re: 2008 Mazda 3 code P2274
Thank you everyone! It was the #3 oxygen sensor all the way in rear of exaust. I replaced and problem cured!
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
