Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
03-06-2017, 10:26 PM | #1 | |
AF Newbie
Join Date: May 2016
Location: Seattle, Washington
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Have I damaged the airbag coil on the steering wheel?
I was using a wheel pulling kit but I stripped out the bolt holes, so I had to use a tap and die to make new threads. I drilled a bit too far and slightly scraped the airbag coil. I'm 99% sure that it's just fine, but the airbag is such a dangerous system that I don't want to take any risks.
Is this a problem, or will it not hurt anything? It's a 1998 GMC Sierra 1500. http://i.imgur.com/Qeark4e.jpg http://i.imgur.com/VBfLzvu.jpg
__________________
"When you're an overweight child in a society that demands perfection, your sense of right, wrong, fair, and unfair, will always be tragically skewed." |
|
03-07-2017, 07:03 AM | #2 | |
A990 racer
Join Date: Mar 2002
Location: Chestertown, New York
Posts: 16,950
Thanks: 25
Thanked 371 Times in 365 Posts
|
Re: Have I damaged the airbag coil on the steering wheel?
If there was any issue the air bag lite would stay on, if that does happen there is a problem of course. Caution should always be exercised when working on or deciding on whether your system is safe.
__________________
|
|
|
POST REPLY TO THIS THREAD |
Tags |
airbag , coil |
|
|