 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools | Search this Thread |
08-23-2004, 01:19 AM
|
#1 | |
|
AF Newbie
Join Date: Aug 2004
Location: Holland, Michigan
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
1995 Pontiac Grand Prix SE Keyless Entry
I just bought a spare keyless entry remote for my 1995 Grand Prix SE...
P/N: 10205241 DOC/MDC: 218 X1035 Model/FCC ID: ABO 0104T Could somebody please tell me how to program this remote. Thank you |
|
|
|
|
08-24-2004, 11:39 AM
|
#2 | |
|
stupidity should hurt
 
Join Date: Aug 2004
Location: Flint, Michigan
Posts: 10,129
Thanks: 2
Thanked 20 Times in 20 Posts
|
Re: 1995 Pontiac Grand Prix SE Keyless Entry
in the passenger side of the trunk, there is a wire, near the antenna. Ground this wire, wait for the locks to cycle, then push any button on the remote and hold until the locks cycle again, and you should be in business. you may have to reprogram your existing remote as well, as some cars erase all old codes when adding a remote. You can do all at the same time, when done, unhook your ground wire and your good
|
|
|
|
|
|
08-28-2004, 01:58 PM
|
#3 | |
|
AF Newbie
Thread starter
Join Date: Aug 2004
Location: Holland, Michigan
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1995 Pontiac Grand Prix SE Keyless Entry
Thank you very much, worked like a charm...
|
|
|
|
|
|
08-28-2004, 03:42 PM
|
#4 | |
|
stupidity should hurt
Join Date: Aug 2004
Location: Flint, Michigan
Posts: 10,129
Thanks: 2
Thanked 20 Times in 20 Posts
|
Re: 1995 Pontiac Grand Prix SE Keyless Entry
Glad I could help, that's what this forum is all about
|
|
|
|
|
|
05-18-2005, 09:45 PM
|
#5 | |
|
AF Newbie
Join Date: May 2005
Location: Bark River, Michigan
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Question
Ok, I have a 94 Pontiac Grand Prix SE
Above you leave the remote numbers from the back of your keyless remote. The numbers are the same as mine, which is probably a good thing. I just can't seem to figure out where to ground out that little wire on something in the back there. If you could tell me where you put yours. Did yours have a little black plastic thing on it like it was suppose to plug in somewhere. If so did u just cut that off or what. Please help thanks for your help. silly me I just paid 4.99 for instructions on ebay when you probably can help me on here ohh well we live and learn thanks again. |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
| Bookmarks |
 |
| Thread Tools | Search this Thread |
|
|
