 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
02-27-2011, 09:07 AM
|
#1 | |
|
AF Newbie
Join Date: Sep 2003
Location: Hopatcong, New Jersey
Posts: 34
Thanks: 1
Thanked 0 Times in 0 Posts
|
94 Acclaim 3.0 code 34
Hi,
I have a 1994 Plymouth Acclaim 3.0 v6 with 145,000 I keep up with all tune up and maintenance items. Wires, plugs, cap, rotor, coil, gas filter are new in the past 6 months. In the past week a problem has occured that I can't pinpoint. The car runs great on the highway but when it idles and driving around the city it hesitates and wants to stall. It does stumble and stall occasionaly. It sets a code 34. The throttle body is cleaned every other oil change. The idleing and stalling makes me think it is a bad IAC motor but not sure if that would set a code 34. Any help would be appreciated. |
|
|
|
|
01-01-2012, 05:28 PM
|
#2 | |
|
AF Newbie
Join Date: Jan 2012
Location: Glendale, Arizona
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 94 Acclaim 3.0 code 34
My car was doing the same thing, but then I looked at the engine code more carefully. The blinking cadence is kind of ambiguous, I finally realized that I actually was not getting a code 34 (which didn't make sense anyways), I was getting a code 12 and then a code 13. The vacuum line to the MAP sensor was fine, the connections were fine too. After replacing the MAP sensor the stalling/skipping problem went away and it runs better. I hope this helps.
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
