Have a 2005 uplander conversion by braun. Been having trouble with the door opening/closing half way or not latching. Went to Chevy and after 4 hours they replaced the spring loaded connector on the door. However it did not resolve the issue.
Took it to mobility express as they sell conversion vans. The tech there replaced bolts an realigned the door and it now seems to open/close fine and stays closed. "Had it open and the ramp lowered while I was making a turn on the way there.
However, every once in awhile when the door opens it seems to stop before the end of it's run requiring me to push it the last 1/4 inch to get the ramp to lower as there it a switch it must hit to activate it.
My question is this. can someone tell my if there is a site that shows where the motor is that operates the door. I know where the cable it attached to the door roller but haven't found where the motor is. TIA
Show Printable Version | 
Email this Page | 
Subscribe to this Thread
05-06-2015, 09:30 AM
