Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Car Modeling Share your passion for car modeling here! Includes sub-forum for "in progress" and "completed" vehicles. |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
03-11-2004, 02:00 AM | #1 | |
AF Newbie
Join Date: Feb 2004
Location: Sydney
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
|
frustration - tamiya sprays
My first few experiences with tamiya sprays (TS) have been pretty positive. But the last few cans that I have used, I haven't been able to spray without the the spray dieing on me. Strange because they were relatively new cans. I tried cleaning the nozzle with thinner...but it didn't seem to help.
Anybody have suggestions or experience with this? |
|
03-11-2004, 07:49 AM | #2 | |
AF Fanatic
Join Date: Sep 2002
Posts: 4,699
Thanks: 8
Thanked 74 Times in 68 Posts
|
Re: frustration - tamiya sprays
Are you heating the cans before you spray?
__________________
There is a lesson in every kit. |
|
03-11-2004, 09:21 AM | #3 | |
AF Regular
|
Re: frustration - tamiya sprays
Are you using them upright? if you turn them sideways I know they don't work very well.
|
|
03-11-2004, 02:31 PM | #4 | |
"P-Man"
|
Re: frustration - tamiya sprays
Try a different nozzel and see if it works.
If it still dont work...take it back to the shop you got it from.
__________________
Current Build.....1/12 Scale Camaro......Almost finished!!! View All My Models Here. |
|
03-11-2004, 02:57 PM | #5 | |
AF Newbie
Thread starter
Join Date: Feb 2004
Location: Sydney
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Re: frustration - tamiya sprays
I found that replacing the nozzle with a new one fixed the problem.
Anyone have any tips in cleaning the nozzles? |
|
03-11-2004, 03:24 PM | #6 | |
AF Enthusiast
|
Re: frustration - tamiya sprays
soak the nozzle in thinner?
__________________
friends let friends drive benzes |
|
03-11-2004, 07:07 PM | #7 | |
Zomby Woof
Join Date: Nov 2002
Location: Oz
Posts: 8,871
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: frustration - tamiya sprays
If the nozzle is blocked try clearing it with some fine wire. Make sure the wire is small enough not to enlarge the nozzle, that could affect the spray pattern.
|
|
|
POST REPLY TO THIS THREAD |
|
|