Automotive Forums .com - the leading automotive community online! Automotive Forums .com - the leading automotive community online!
Automotive Forums .com - the leading automotive community online! 
-
Latest | 0 Rplys
Go Back   Automotive Forums .com Car Chat > Toyota > RX300/RX330/Harrier
Register FAQ Community Arcade Calendar
Reply Show Printable Version Show Printable Version | Email this Page Email this Page | Subscription Subscribe to this Thread
 
Thread Tools
Old 03-22-2009, 08:11 AM   #1
LexusCup
AF Newbie
 
Join Date: Mar 2009
Location: Atlanta, Georgia
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
What other components to replace w/timing belt?

RX300 with 120K, never had a timing belt. I see you can buy kits from Ebay that come with cam seals, pulleys, hydraulic tensioner, front crankshaft seal, etc. I know to change the water pump at the same time, but is it recommended or necessary to replace the other parts mentioned above while there? The parts seem inexpensive enough, but is wise to do?
LexusCup is offline   Reply With Quote
Old 03-27-2009, 11:36 AM   #2
jdmccright
The RustBuster
 
jdmccright's Avatar
 
Join Date: Feb 2006
Location: La Plata, Maryland
Posts: 2,290
Thanks: 1
Thanked 51 Times in 50 Posts
Re: What other components to replace w/timing belt?

Technically it's not necessary, but because there is some work in disassembling the front of the engine to change the belt, it is usually worthwhile to do it all at once. What would be worse than to change the belt only to find out a few months later you have to disassemble it all again for a leaking oil seal?

Those seals do age and harden, so replacing them with the belt is wise. Some people can skip replacing the seals at the first belt change, but would definitely do it at the second one. Not very difficult, but you have to be careful to not score or scratch the sealing surfaces around the shafts. I'd recommend it...as you say, they're inexpensive and saves labor from a leaker later on.

As for the tensioners, pulleys, and water pump, I would say it is not necessary unless they are showing signs of wear (noise, loose bearings, stretched springs, weeping coolant, or wet timing belt).

I've replaced the water pump in my Camry once, only for the reason that I had hit 200k miles, and the one I got had a significantly different impeller. It still works, but was disappointed I removed a pump with a nice stainless steel one for a cast iron(?) one.

Hope this helps!
__________________
Current Garage:
2009 Honda CR-V EX
2006 Mazda 3i
2004 Chevrolet Silverado 2500HD
2003 GMC Envoy XL
2000 Honda ST1100
2000 Pontiac Sunfire

Vehicle History:
2003 Pontiac Vibe AWD - 1999 Acura Integra GS - 2004 4.7L Dakota Quad Cab 4x4 - 1996 GMC Jimmy 4wd - 1995 Chevrolet C2500 - 1992 Toyota Camry LE 2.2L - 1992 Chevrolet S10 Ext. Cab 4.3L - 1995 Honda ST1100 - 1980 Yamaha XS400 - 1980 Mercury Bobcat.

Last edited by jdmccright; 03-27-2009 at 11:44 AM. Reason: added info
jdmccright is offline   Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums .com Car Chat > Toyota > RX300/RX330/Harrier


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:29 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts