Automotive Forums .com - the leading automotive community online! Automotive Forums .com - the leading automotive community online!
Automotive Forums .com - the leading automotive community online! 
-
Latest | 0 Rplys
Go Back   Automotive Forums .com Car Chat > GMC > Yukon
Reply Show Printable Version Show Printable Version | Email this Page Email this Page | Subscription Subscribe to this Thread
 
Thread Tools Search this Thread
Old 04-10-2013, 09:26 AM   #1
azbaseball
AF Newbie
 
Join Date: Apr 2013
Location: phoenix, Arizona
Posts: 1
Thanks: 1
Thanked 0 Times in 0 Posts
Error Codes P0332 and P0171 & 0174

Good Day All:

I have a GMC Yukon XL 2002 5.3 V8
The check engine light is on and the codes are P0332 Knock Sensor Circuit Low Frequency Bank 2
The other codes are P0171 and P0174 both are referring to fuel trim system lean bank 1 and 2.
First question: Could these error codes be related?
Second P0332 knock sensor: to remove the air intake manifold the gasket should/will also need to be replaced correct.
Third Question Fuel Trim System Lean: What does that mean and where does that direct me for repairs.


Thank you

Mike
azbaseball is offline   Reply With Quote
Old 04-10-2013, 09:43 AM   #2
gmtech1
AF Enthusiast
 
gmtech1's Avatar
 
Join Date: Aug 2011
Location: Beachside
Posts: 2,000
Thanks: 4
Thanked 301 Times in 299 Posts
Re: Error Codes P0332 and P0171 & 0174

Yes, they could all be related. the 171 and 174 both set tells me you have a vacuum leak. The 5.3 was bad about vacuum leaks at the intake gaskets. If you had a scanner that monitored fuel trim, you could vent some propane at the base of the intake and watch the fuel trim change. I would change the gaskets and replace the knock sensor when the intake was out.
gmtech1 is offline   Reply With Quote
The Following User Says Thank You to gmtech1 For This Useful Post:
azbaseball (04-10-2013)
Old 05-23-2013, 09:16 PM   #3
Victor520
AF Newbie
 
Join Date: Oct 2012
Location: New York
Posts: 34
Thanks: 1
Thanked 4 Times in 2 Posts
Re: Error Codes P0332 and P0171 & 0174

__________________
where there is a will there is a way
just a blog
Victor520 is offline   Reply With Quote
Old 08-28-2014, 12:57 PM   #4
sleber
AF Newbie
 
Join Date: Nov 2003
Location: Germantown, Tennessee
Posts: 47
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Error Codes P0332 and P0171 & 0174

Most likely intake gasket leak & if you ever washed engine or driven through deep deep standing water, more than likely knock sensor got wet. Have intake gasket replace and be sure to replace both knock sensors when having intake gasket replaced.
sleber is offline   Reply With Quote
Old 03-07-2020, 03:19 PM   #5
ky wonder
AF Newbie
 
Join Date: Oct 2006
Location: horse cave, ky, Kentucky
Posts: 31
Thanks: 1
Thanked 0 Times in 0 Posts
Re: Error Codes P0332 and P0171 & 0174

Before you do that, replace the evap purge valve just behind the alternator, this valve can stick in the open or close position, causing the clean codes as well, good news is you can by one online for 20 bucks. And put it on yourself if you have any aptitude at all, simple unplug, and plug back
YouTube is your friend
ky wonder is offline   Reply With Quote
 
Reply

POST REPLY TO THIS THREAD


Bookmarks
Go Back   Automotive Forums .com Car Chat > GMC > Yukon

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:15 AM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts