Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
04-15-2012, 01:22 PM | #1 | |
AF Newbie
|
1994 cad eldo w north star stalling
Hello. the map sensor location on the north star engine , Under the intake or there is a sensor bolted to the power brake booster that looks like the old gm map ? Any ideals ..... Keeps shuting off every now and then . Already tryed the crank and cam sensors..... Thanks.....
|
|
04-15-2012, 05:09 PM | #2 | |
A990 racer
Join Date: Mar 2002
Location: Chestertown, New York
Posts: 16,946
Thanks: 25
Thanked 369 Times in 363 Posts
|
Re: 1994 cad eldo w north star stalling
Map will not cause what you describe plus it would set a code, does it start right up what are the stall conditions?
__________________
|
|
04-16-2012, 03:09 PM | #3 | |
AF Newbie
Thread starter
|
Re: 1994 cad eldo w north star stalling
Yes , it does start right back up ! it has a code for low volts to map , And a load of pcm failure codes . it does not do it all the time , I releaned the idle like the book said.... Ive clean all grounds and connection to the battery.
|
|
04-16-2012, 06:50 PM | #4 | |
A990 racer
Join Date: Mar 2002
Location: Chestertown, New York
Posts: 16,946
Thanks: 25
Thanked 369 Times in 363 Posts
|
Re: 1994 cad eldo w north star stalling
You need to track down/ diagnose the other pcm failure codes first.
__________________
|
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|