 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
| Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
05-09-2010, 02:04 PM
|
#1 | |
|
AF Newbie
Join Date: May 2010
Location: pensacola, Florida
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
problem with motor turning over and cranking
1999 s10, problem with it catching and cranking takes anywhere from 15 mins to an hour to get it to crank...battery and starter good and putting out proper voltage....Security light has come on, I think it may be in the security relay... any advice...And where is the security relay...can't locate it... Thanks
|
|
|
|
|
05-09-2010, 07:44 PM
|
#2 | |
|
Advisor/Moderator
 
Join Date: Nov 2005
Location: Belleville, Michigan
Posts: 5,184
Thanks: 6
Thanked 103 Times in 95 Posts
|
Re: problem with motor turning over and cranking
"takes anywhere from 15 mins to an hour to get it to crank". By "crank" do you mean the starter will not crank the engine, or it will crank but not start? Big difference.
__________________
You have to know how it works, to figure out why it doesn't. |
|
|
|
|
|
05-11-2010, 05:50 PM
|
#3 | |
|
AF Newbie
Thread starter
Join Date: May 2010
Location: pensacola, Florida
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: problem with motor turning over and cranking
it will run for 2-5 seconds then quit....
|
|
|
|
|
|
05-11-2010, 06:49 PM
|
#4 | |
|
Advisor/Moderator
Join Date: Nov 2005
Location: Belleville, Michigan
Posts: 5,184
Thanks: 6
Thanked 103 Times in 95 Posts
|
Re: problem with motor turning over and cranking
Definitely sounds like a Passlock problem. Try the Passlock relearn procedure: Clear all VTD module and VCM DTC's. Key ON and momentarily engage starter, do not start the engine, turn key back to ON position for ten minutes, off five seconds, repeat three times. If it still doesn't work, the dealer will have to do a "forced relearn" with a Tech 2 scan tool.
__________________
You have to know how it works, to figure out why it doesn't. |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
| Tags |
| relay , s10 , security , starting , trouble |
 |
|
|
