Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
01-11-2002, 04:17 PM | #16 | |
AF Newbie
Join Date: Jan 2002
Location: knoxville, Tennessee
Posts: 10
Thanks: 0
Thanked 0 Times in 0 Posts
|
hey guys , I am new here . I was wondering if someone could help me figure out how to program a keyless remote for a 95 Blazer . I have done one before on a T/A I had , but the wire configuration in the diagnostic terminal is different here , there are only 6 wires in the back of it . Thanks !
|
|
01-14-2002, 08:04 AM | #17 | |
AF Enthusiast
Join Date: Sep 2001
Posts: 553
Thanks: 0
Thanked 0 Times in 0 Posts
|
My 95 Book doesn't show programming, so I went to the 96 book. As near as I can tell the vehicles are the same I'm not showing a change until 98, so from 94-97 this info should be correct.
1) Ground terminal No. 8(black/white wire) of Data Link Connector (DLC) Located under lower left side of dash. Reciever will respond by locking and unlocking doors within 2 seconds. Press any button of first transmitter to be programmed. Control module will respond by locking/unlocking all doors and activationg liftgate release 2) Press any button of second transmitter to be programmed. Control module will again respond by locking/unlocking all doors and activating hatch release. Remove ground from DLC terminal 8. Transmitter operation can then be verified. Attempt all functions with remote. |
|
01-15-2002, 07:35 AM | #18 | ||
AF Enthusiast
Join Date: Sep 2001
Posts: 553
Thanks: 0
Thanked 0 Times in 0 Posts
|
Quote:
I found two remotes identical to each other. I believe they are from a Suburban approx. 95 year. GM P/N 15955702 DOC/MDC 218 K1035 FCC ID ABO 01047 I don't have X reference guides on these remotes to see what they are compatible with, but most GM vehicles from that time period used TRW systems. The ones I have have "Lock" on the left, "Unlock" on the right, and "Rear" on the bottom center. If you would like to send me your address via e-mail, I will mail one or both to you and you can see if they will program. Jack@directed.com |
||
01-18-2002, 10:13 AM | #19 | |
AF Newbie
Join Date: Jan 2002
Location: Dover, Pennsylvania
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Need help with a 99 Tahoe
You have some great tips posted here. I want to thank you very much!! I have a '99 Tahoe that has remote keyless entry and remote start. The only problem with this is that they are on two different controllers. I was wondering if the stock keyless entry is smart enough to be programmed to accept a new transmitter that can do all of the above.
Any ideas? I have a transmitter from crimestopper that can do both. Please let me know. |
|
01-18-2002, 10:20 AM | #20 | |
AF Enthusiast
Join Date: Sep 2001
Posts: 553
Thanks: 0
Thanked 0 Times in 0 Posts
|
zippy6000
Your Crimestopper, provided it has the outputs to do door locks, will do your keyless and remote start. But, you can not program the factory remote to the Crimestopper unit. They two units operate off of different frequencies. Sorry. |
|
01-18-2002, 10:26 AM | #21 | |
AF Newbie
Join Date: Jan 2002
Location: Dover, Pennsylvania
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
re: Need help with a 99 Tahoe
Thanks for the quick reply. The Crimestopper remote is from a different car. I just got the Tahoe and I don't know what remote start system it has in it.
So is there anyway at all that I could get it down to one remote. Except for installing a new remote start/keyless entry combo and bypassing everything that is in it now? |
|
01-18-2002, 10:31 AM | #22 | ||
AF Enthusiast
Join Date: Sep 2001
Posts: 553
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: re: Need help with a 99 Tahoe
Quote:
|
||
01-25-2002, 10:16 AM | #23 | ||
AF Enthusiast
Join Date: Sep 2001
Posts: 553
Thanks: 0
Thanked 0 Times in 0 Posts
|
Quote:
Drop the underdash. there are 3 -7mm holding it up. Right next to the parking brake mounted on the underdash pane is a module. This is you keyless entry module. Ground the black wire with the white stripe wire The doors will lock then unlock, and the hatch should pop press lock on each remote one at a time The doors should lock/ unlock to confirm the remote(s) Remove ground from black/white wire. Hope that helps!
__________________
Why isn't common courtesy more common? |
||
01-26-2002, 10:52 AM | #24 | |
AF Newbie
Join Date: Jan 2002
Location: knoxville, Tennessee
Posts: 10
Thanks: 0
Thanked 0 Times in 0 Posts
|
Hi Tireburner,
I tried the module procedure on my 95 Blazer and it worked like a charm . Just a thank you note , you certainly went out of your way to help me out , and I really appreciate it . Thanks again.
__________________
|
|
02-04-2002, 11:12 AM | #25 | ||
AF Enthusiast
Join Date: Sep 2001
Posts: 553
Thanks: 0
Thanked 0 Times in 0 Posts
|
Quote:
Happy to be of service!!!
__________________
Why isn't common courtesy more common? |
||
02-05-2002, 11:24 AM | #26 | |
AF Newbie
Join Date: Feb 2002
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Prgrammng '97 Chevy Suburban keyless
Appreciate all the tips provided for this thread especially grateful to Tireburner for the manual excerpts.
For our vehicle, '97 Chevy Suburban, I attempted programming a transmitter from the recommendations provided by Tireburner on the '98 Blazer but wasn't successful. I researched Tireburner's recommendation for the '95 Blazer; after looking under the dash near the parking brake, I couldn't identify the keyless entry module or the black and striped wires noted. Is the '95 Blazer procedure the right direction to take? If so, could the keyless entry module be in a different location than the Blazer and/or are there any distinguishable marks that may help a shadetree dummy like myself identify this module? Thanks for your time! |
|
02-05-2002, 11:38 AM | #27 | ||
AF Enthusiast
Join Date: Sep 2001
Posts: 553
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Prgrammng '97 Chevy Suburban keyless
Quote:
1)Ground terminal #8 (black/white wire)of Data Link connector (DLC) Receiver willl respond by locking / unlocking all doors within 2 seconds. Press and hold LOCK and UNLOCK buttons on the remote simeltaneously on first transmitter until locks cycle (lock then unlock) 2) Press and hold LOCK and UNLOCK buttons simeltaneously on second transmitter until the locks cycle Remove ground from black white wire pin # 8 at DLC Transmitter function can now be verified.. DLC is located under drivers side of dash, bolted directly to the bottom of the dash panel Hope this helps!
__________________
Why isn't common courtesy more common? |
||
02-06-2002, 10:17 AM | #28 | |
AF Newbie
Join Date: Feb 2002
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
RE: '97 Suburban remote
Tireburner: Thanks for the information on programming our keyless remotes for the '97 Suburban. The procedures listed went exactly as you described. Your expertise and willingness to share it is certainly appreciated.
Brokenbone |
|
02-06-2002, 10:24 AM | #29 | |
AF Enthusiast
Join Date: Sep 2001
Posts: 553
Thanks: 0
Thanked 0 Times in 0 Posts
|
Brokenbone:
Thank You! Happy that I could be of assistance!
__________________
Why isn't common courtesy more common? |
|
02-08-2002, 10:04 AM | #30 | |
AF Newbie
Join Date: Feb 2002
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Programing 99 Buick Park Ave
I have tried all the methods listed and none of them work on my car. Does anyone have the info on this car? The remote is a GM/UTA FCC# K0BUT1BT.
|
|
|
POST REPLY TO THIS THREAD |
|
|