Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
09-22-2005, 10:40 AM | #1 | |
AF Newbie
Join Date: Sep 2005
Location: New York, New York
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
fx35 Need Programming Instructions- keyless remote
Hi,
Does anyone know how to program the keyless remote for fx35. It's 2005. and I do not have owner's manuel for my car.. Thank you.. |
|
09-23-2005, 01:01 AM | #2 | |
Authorized Vendor
Join Date: Sep 2003
Location: Keyless Entry Remotes
Posts: 741
Thanks: 0
Thanked 8 Times in 8 Posts
|
Re: fx35 Need Programming Instructions- keyless remote
FX35:
Instructions: 1) New ID code has to be manually entered whenever replacing remote control or LCU 05, or adding additional remote control(s). To enter ID code, perform steps 2) and 3). 2)Close and lock all doors. Erase original ID code(s) by inserting and removing key from ignition switch more than 6 times within 10 seconds. Hazard warning lights should flash twice. 3) Turn ignition switch to ACC position. Push lock button on new remote control once. Hazard warning lights should flash twice, indicating ID code for new remote control has been entered. 4) To enter additional remote control ID code(s), unlock driver's door and then lock it using door lock knob. Press lock button on new remote control once to enter ID code. 5) A maximum of 4 remote control ID codes can be entered. If same ID code is entered more than once, the entry is ignored even through hazard warning light will still flash. To exit progrmming (ID entry) mode, open driver's door.
__________________
Replacement keyless entry remotes available here - up to 90% off - All makes/models from Acura-Volvo, 1988-present - http://www.OriginalKeyless.com |
|
|
POST REPLY TO THIS THREAD |
|
|