 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools | Search this Thread |
05-14-2008, 08:55 AM
|
#1 | |
|
AF Regular
Join Date: Sep 2004
Location: SOMEWHERE
Posts: 113
Thanks: 0
Thanked 2 Times in 2 Posts
|
3.1 Litre Oil Pump Shaft O-ring
HELLO TO ALL:
DO ANY OF YOU HAVE THE EXACT PART NUMBER FOR THE ABOVE? I ASK AS I WAS SOLD THE INCORRECT PART BY A DEALER. THIS IS NOT THE FIRST TIME THIS SORT OF THING HAS OCCURED WITH THIS ENTERPRISE. SO I AM DONE WITH THEM AT THIS POINT. ANY GUIDANCE HERE WOULD BE GREATLY APPRECIATED. THANK YOU AND REGARDS, FISH96 P.S. ANY AFTERMARKET PART NUMBER WOULD BE FINE ALSO, i.e.VICTOR, FEL PRO, HELP, etc. |
|
|
|
|
05-26-2008, 03:00 AM
|
#2 | |
|
AF Regular
 Join Date: Dec 2004
Location: San Antonio, Texas
Posts: 201
Thanks: 0
Thanked 0 Times in 0 Posts
 |
Re: 3.1 Litre Oil Pump Shaft O-ring
i would try napa online and see if you can find one that matches. good luck.
__________________
Certified Mechanic 9 years experience Auto Business Owner |
|
|
|
|
|
06-04-2008, 12:22 PM
|
#3 |
|
AF Newbie
Join Date: Aug 2005
Location: Ada, Michigan
Posts: 16
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 3.1 Litre Oil Pump Shaft O-ring
|
|
|
|
|
06-04-2008, 03:04 PM
|
#4 | |
|
A990 racer
 Join Date: Mar 2002
Location: Chestertown, New York
Posts: 16,683
Thanks: 16
Thanked 341 Times in 335 Posts
|
Re: 3.1 Litre Oil Pump Shaft O-ring
Looks like it, but how can a picture determine the proper size. why not match the old one up at a parts house. Also in the future post the year of the car.
__________________
|
|
|
|
|
|
06-04-2008, 03:25 PM
|
#5 | |
|
AF Regular
Thread starter
Join Date: Sep 2004
Location: SOMEWHERE
Posts: 113
Thanks: 0
Thanked 2 Times in 2 Posts
|
Re: 3.1 Litre Oil Pump Shaft O-ring
Thank You All For The Assistance, 2002 Malibu 3.1 Litre Vin J.
At Least I Now Have A Part Number; Yes It Is Different Than The One I Was Given. The O-rings I Have Seen At The Local Parts Store Do Not Appear To Be Made Of The Proper Material, Which I Believe Is Viton (hi-temp Resist. 400f.) Regards, Fish96 |
|
|
|
|
|
06-04-2008, 07:57 PM
|
#6 | |
|
A990 racer
Join Date: Mar 2002
Location: Chestertown, New York
Posts: 16,683
Thanks: 16
Thanked 341 Times in 335 Posts
|
Re: 3.1 Litre Oil Pump Shaft O-ring
It is also recommended to use some rtv on the "o" ring for guaranteed sealing, as this is a problematic area.
__________________
|
|
|
|
|
|
06-05-2008, 06:29 AM
|
#7 | |
|
AF Regular
Thread starter
Join Date: Sep 2004
Location: SOMEWHERE
Posts: 113
Thanks: 0
Thanked 2 Times in 2 Posts
|
Re: 3.1 Litre Oil Pump Shaft O-ring
Thanking You All Again For The Most Learned Assistance. I Have Planned To Place Fiber Gasket Fel Pro #70194 With A Slight Coating Of Rtv Silicone On The Block Sealing Surface Of The Shaft.
Regards, Fish96 |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
| Bookmarks |
 |
| Thread Tools | Search this Thread |
|
|
