Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
06-29-2018, 05:06 PM | #1 | |
AF Newbie
Join Date: Jun 2018
Location: kuantan
Posts: 3
Thanks: 1
Thanked 1 Time in 1 Post
|
Camry 1999 - Engine Light Code P0340
Please Help,
History when first happen to my camry 1999 5SE V4. 1.Start engine - with engine light appear 2.Switch Off engine & check - try to start but no crank. 3.Check battery - week. 4.Change new battery - enable to start, drove about 1 hour, but engine light ON & OFF 5.Switch Off engine - try to start but no crank. 6.Check repair Starter - enable to start - but engine light still appear 7.Scan engine light - P0340 Camshaft Position Sensor 'A' Circuit Malfunction 8.Change - Camshaft Position Sensor - Scan & Erase still code P0340. 9.Check & Change new Timming Belt - Code P0340 10.Check & Redo wiring - Scan & Erase - Code P0340. Any Ideas what to do next. Thanks |
|
06-29-2018, 08:19 PM | #2 | |
Resident Chemist
|
Re: Camry 1999 - Engine Light Code P0340
If you haven't,
1. Trace the wiring for continuity from the CPS to the ECM. 2. Clean both sets of contacts of the CPS with electronics spray. 3. See if you can't temporarily replace the ECM with one that you know works. Do you have a maintenance manual for your vehicle?
__________________
Forum Guidelines:http://www.automotiveforums.com/vbulletin/guidelines.html "What we've got here is a failure to communicate" |
|
The Following User Says Thank You to Brian R. For This Useful Post: |
wmkosm (06-29-2018)
|
06-29-2018, 09:27 PM | #3 | |
AF Newbie
Thread starter
Join Date: Jun 2018
Location: kuantan
Posts: 3
Thanks: 1
Thanked 1 Time in 1 Post
|
Re: Camry 1999 - Engine Light Code P0340
1. Trace the wiring for continuity from the CPS to the ECM.
2. Clean both sets of contacts of the CPS with electronics spray. I will do what as recommended. Will update the result. |
|
06-30-2018, 06:14 PM | #4 | |
Resident Chemist
|
Re: Camry 1999 - Engine Light Code P0340
Check the resistance between the terminals of the CPS. (I know it's new)
Cold 835 – 1,400 ohms Hot 1,060 – 1,645 ohms If it's bad, buy a DENSO or NGK sensor, only.
__________________
Forum Guidelines:http://www.automotiveforums.com/vbulletin/guidelines.html "What we've got here is a failure to communicate" |
|
07-04-2018, 08:08 AM | #5 | |
AF Newbie
Thread starter
Join Date: Jun 2018
Location: kuantan
Posts: 3
Thanks: 1
Thanked 1 Time in 1 Post
|
Re: Camry 1999 - Engine Light Code P0340
Solved
Check the resistance between the terminals of the CPS, found that broken wire. No engine light Thanks |
|
The Following User Says Thank You to wmkosm For This Useful Post: |
Brian R. (07-04-2018)
|
07-04-2018, 11:26 AM | #6 | |
Resident Chemist
|
Re: Camry 1999 - Engine Light Code P0340
Thank you for reporting the fix.
__________________
Forum Guidelines:http://www.automotiveforums.com/vbulletin/guidelines.html "What we've got here is a failure to communicate" |
|
|
POST REPLY TO THIS THREAD |
|
|