 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
11-08-2010, 05:28 PM
|
#1 | |
|
AF Newbie
Join Date: Dec 2004
Location: Ocean Springs, Mississippi
Posts: 69
Thanks: 0
Thanked 0 Times in 0 Posts
|
2004 2.4l fan clutch removal
Working on my son's 2004 Frontier with a 2.4l. Replacing the water pump and having trouble with removing the fan clutch attached to the front of the pump.
First question: are the nuts right hand or left hand thread? I can't seem to break them either way and I've started to round the corners of two nuts. Second question - are the nuts 10mm? I'm using a 10mm tubing wrench and it seems to be correct but it's not quite tight. Any help would be appreciated - Thanks, Duane |
|
|
|
|
12-18-2012, 01:21 PM
|
#2 | |
|
AF Regular
Join Date: May 2004
Location: Phoenix, Arizona
Posts: 358
Thanks: 0
Thanked 3 Times in 3 Posts
|
Re: 2004 2.4l fan clutch removal
Well, I hope you got this completed by now. I've done this job on a 1998 with that engine, and it was straightforward. I used a 10mm box wrench, and the threads are typical right-hand threads. It is a little cramped.
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
| Thread Tools | |
|
|
