Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Other Other fabricating topics. |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
05-03-2005, 02:14 PM | #1 | |
AF Newbie
Join Date: May 2004
Location: Sacramento, California
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
|
Brake booster and Master Cylender Modification?!?
Ok so here is the deal
I have a Brake Booster out of a 1990s Geo Metro the one that is roughly 5.5" accross. I have to use this booster because it barley fits between my engine and wheel as it is. Ok it is pushing fluid with the stock geo master cylender to 1994 2wd Toyota Pickup front disk brakes and calipers, and 1991 RX7 GXL rear disk brakes and calipers. The issue i am having is that the master cylender does not push enough fluid. I realy need a master cylender with a bigger bore. Does anyone know if there is a bigger master cylender that would bolt into this booster? Or is there some place or some way i could get a master cylender modified to fit this booster or modify the master cylender i have to push more fluid? Any help or suggestions would be greatly appreciated. Thanks Miles.
__________________
I love building custom stuff check out my work |
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|