remember i ask will thiskit fit my geo prism

[bigirb2002]

it fits ok but ima have to widen the fenders near where the kit touches the fender a bit. what do you recommend using

[TheSilentChamber]

Woah... so many jokes, so little time. My instinct would tell me to recomend fiberglass, but my eyes tell me to recomend a hammer.


Sorry bro, but thats just ... bad.

[bigirb2002]

u lil bastard at least let me fuckin get the shit on an painted with rims before u comment u lil 10 year old bastard

[TheSilentChamber]

::shrug::

[bigirb2002]

dude im not trying to be a ass im trying to get the thing on the road an painted thats all. i just wanna use somthign to widen my fender an mold the kit on but i wanna do it the right way.all i want to kno what to use !simple!

[mike@af]

Originally Posted by bigirb2002

u lil bastard at least let me fuckin get the shit on an painted with rims before u comment u lil 10 year old bastard

You need to watch what you post. By posting on a public you are going to get all sorts of comments, both good, and bad. Some may be helpful, others may just be peoples honest opinion. You are not going to like every post. Consider this a warning.

I say cut up the kit in many many places. Right now it sticks out to far all around and looks like a boat or a snow plow. The front kit is rounded, where the car is boxy. Its going to need some extensive modifications. Im no fiberglass expert, so listen to TSC.

[bigirb2002]

well in the picture i put the kit on the existing bumper when i took the bumpers off everything came out ok an it wasnt sticking out anymore everything fit just right exept the front fender/kit i was wondering what to put on it to smooth it out before i paint it

[RSLaser]

smooth it out before i paint it

Bondo...and lots of it.

[CBFryman]

lol, on GTmikes note...

"DOOOOD!, A!! U H@V 2 D0 Iz Git Teh Sk!l!n3 T@!L lits & !T W!II L00K Gu$t l1ke 1!!!111!!11!!!"

ok im sorry, that car is probably your pride and joy just like my truck is mine.

lol, seriously, that reminded me of an old boxy accord i saw that had the bodykit that looked like the front end of a skyline (boxy with the same inlets and air dam shape) ghetto rigged to it with rivets and stickey tape.

As far as making it look right, fiberglass and bondo...fiberglass and bondo...

[bigirb2002]

im not ghetto, i do things right an i garantee when i show u the finished pics you will all change your minds about it

[TheSilentChamber]

I'll go ahead and speak from the future, and say I wont change my mind, but I'm just here to help, not to criticize (althought they arnt paying me, so I dont allways follow that rule....) The best thing for you to do would be to use fiberglass.