Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Engineering/Technical Ask technical questions about cars. Do you know how a car engine works? |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
04-20-2006, 07:22 PM | #1 | |
AF Enthusiast
|
Compression Ratio = Gear Ratio??
Is the Compression ratio also called the Gear ratio?
I have a 2004 350Z and the compression ratio is listed as 10.3:1 and I wanted to see if that's the same as gear ratio. I'm having a custom supercharger built and I need to know. The 350Z forum isn't very active so I thought I would ask here. Any help would be greatly appreciated. |
|
04-20-2006, 07:29 PM | #2 | |
Forunn Daberator
Join Date: Mar 2004
Location: bumblefuck, Texas
Posts: 10,590
Thanks: 363
Thanked 364 Times in 309 Posts
|
Re: Compression Ratio = Gear Ratio??
no, compression and gear ratios are two completely seperate -not even connected in the slightetest ways- things
__________________
|
|
04-20-2006, 07:34 PM | #3 | |
AF Enthusiast
Thread starter
|
Re: Compression Ratio = Gear Ratio??
Ok, I found the gear ratio for a manual. I can't find anything on yahoo or google for an automatic. Any ideas? Call a dealership maybe?
|
|
04-20-2006, 07:37 PM | #4 | |
AF Enthusiast
Join Date: Nov 2003
Location: Ottawa
Posts: 3,191
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Compression Ratio = Gear Ratio??
compression ratio is the volume in the cylender at bottom dead center divided by the volume of the cylender at top dead center. so a 10:1 compression ratio means that there is 10 times more volume when the cylender is at the bottom then when it's at the top.
gear ratio is just the ratio of the input speed vs the output speed, or input torque vs output torque. it's usually speed. so a differential that sais it's 3.50:1 means that the input shaft will spin 3.50 times when the output shaft spins once. i dont know if this is clear, im not very good at explaining some things. someone clear it up.
__________________
Mr. T doesn't pity anyone who likes the Black Eyed Peas. He just kills them. Mr. T speaks only when necessary. His main form of communication is folding his arms and slowly shaking his head. And regardless of the situation, he is always understood. On the A-team, Face , Haniabal, and Murdoch were all masters of disguise. Mr T didn't have to wear a disguise. The bad guys didn't recognize him out of fear. |
|
04-20-2006, 07:49 PM | #5 | |
AF Enthusiast
Thread starter
|
Re: Compression Ratio = Gear Ratio??
Ask.com got me this
04 350Z Roadster Final Drive Gear Ratio = 3.357 That look right? Or am I going to look for ratios from 1st gear all the way to 5th gear? |
|
04-20-2006, 08:04 PM | #6 | |
AF Enthusiast
Join Date: Nov 2003
Location: Ottawa
Posts: 3,191
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Compression Ratio = Gear Ratio??
well i dont know why you'd want the final drive ratio for a supercharger. you'd want the compression ratio because it will determine how much boost you can run. do a search in this forum and the forced induction forum for octane, or boost, and look for something that tells you about it, there are countless threads about it.
__________________
Mr. T doesn't pity anyone who likes the Black Eyed Peas. He just kills them. Mr. T speaks only when necessary. His main form of communication is folding his arms and slowly shaking his head. And regardless of the situation, he is always understood. On the A-team, Face , Haniabal, and Murdoch were all masters of disguise. Mr T didn't have to wear a disguise. The bad guys didn't recognize him out of fear. |
|
04-20-2006, 09:50 PM | #7 | |
AF Enthusiast
Thread starter
|
Re: Compression Ratio = Gear Ratio??
Ok. Thanks for your help. I hope this turns out the right way. I've spent a lot of money for it not to turn out the right way, and that would suck.
|
|
04-21-2006, 10:51 AM | #8 | |
Razor Sharp Twit
Join Date: Mar 2004
Location: london
Posts: 5,863
Thanks: 0
Thanked 25 Times in 21 Posts
|
Re: Compression Ratio = Gear Ratio??
might be a strange question but wouldn't the guy making the thing for you be able to tell you?
|
|
04-23-2006, 10:10 AM | #9 | |
AF Enthusiast
Thread starter
|
Re: Compression Ratio = Gear Ratio??
You would think. It's all worked out now. Thanks for your help. Prolly would have been screwed up if you all didn't help. Many thanks!
|
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|