Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
09-12-2019, 07:11 PM | #1 | |
AF Regular
Join Date: May 2005
Location: Saddle Brook, New Jersey
Posts: 141
Thanks: 0
Thanked 0 Times in 0 Posts
|
2001 RAV4 - Mode $06 TID $01 CID $02 Error
Using Torque Pro I got TID 01 CID $02 error.
It says Rich to lean sensor threshold voltage constant Max: 128 Current: 143 I did some research and for Toyota: Both TID $01 and CID $01 relate to the catalyst monitor. TID $01 as Catalyst and CID $01 as Catalyst Deterioration Level for Bank 1. I got TID $01 as Catalyst and CID $02 as Catalyst Deterioration Level for Bank 2 but not sure. Could this mean a bad downstream O2 sensor or are the catalytic converters really bad? I also had error codes P0420 and P0430 indicating bad catalytic converters. Any help would be appreciated. Thank you. |
|
09-13-2019, 02:13 PM | #2 | |
Resident Chemist
|
Re: 2001 RAV4 - Mode $06 TID $01 CID $02 Error
It is very possible that the problem is the Sensor 2. Considering the difference in cost, I would certainly replace the downstream sensor and see if it solves the problem. I don't know of any other sensor which monitors the catalyst efficiency for the ECM other than the HO2 sensor.
__________________
Forum Guidelines:http://www.automotiveforums.com/vbulletin/guidelines.html "What we've got here is a failure to communicate" |
|
09-13-2019, 03:12 PM | #3 | |
AF Regular
Thread starter
Join Date: May 2005
Location: Saddle Brook, New Jersey
Posts: 141
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 2001 RAV4 - Mode $06 TID $01 CID $02 Error
I would like to be able to test the sensor more thoroughly before replacing it. When I reset the codes, the light stays off for almost 2 weeks. I was fortunate enough to pass inspection because it completed and passed all of the monitor tests long enough.
|
|
|
POST REPLY TO THIS THREAD |
|
|