Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
WIP - Motorsports Post topics for any "Work In Process" motorsports vehicles in this sub-forum. |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
01-30-2013, 09:13 AM | #1 | |
AF Regular
|
Porsche 959 Paris-Dakar 1986 Modellingmaster
Hallo friends! Its a my first WIP in this forum. (These are the only words which I could write itself, without the translator)
I am ready to show to you work on Tamiya and Transkit set from Roman (Modellingmaster). I was hit a set personally from it in hands and long time didn't start its assembly. And here I nevertheless overcame in myself laziness and got down to business! Allow to do in this message less comments to a photo because I opened WIP not at once as started assembling a set. Further I will do more explanations. Long ago I promised Romik505 to assemble his creation and competition it appeared just. Frankly speaking there are still works which are at a different stage of readiness and I all the same decided to do it. Romka assembled a test sample at number 185 [img] http://autoinscale.com/data/00000972/00.jpg [/img] I will do the winner of race at number 186, either the first or second commercial set. Though a sticker on a box with three zero:/ [img] http://farm5.staticflickr.com/4061/4...d244856b_z.jpg [/img] The good review of interiors was made by Stas in due time http://autoinscale.com/?section=article&id=1007 http://fotki.yandex.ru/users/sebphotographer/view/490357/ http://fotki.yandex.ru/users/sebphotographer/view/490356/ Two days I won against a blank-end cover of a cowl, a spoiler, a framework and the shelf over the engine. Most of all time I spent for a cowl cap. Because the native body at me burst in any way in a box, it was necessary to use that poured in the last parties. Because of it details from the first set are rather badly joined. It was necessary to increase weight in some places. Shorter report: Here it is visible plastic and that that I add it around a spoiler. http://fotki.yandex.ru/users/sebphotographer/view/490414/ http://fotki.yandex.ru/users/sebphotographer/view/490416/ The cap didn't want to rise into place as there it is necessary to it. More precisely even it has to lie. Therefore it was necessary to engage the head and to think as it to fix. I thought up so, keeps fine. http://fotki.yandex.ru/users/sebphotographer/view/490417/ http://fotki.yandex.ru/users/sebphotographer/view/490418/ I continued to adjust details http://fotki.yandex.ru/users/sebphotographer/view/490419/ And in 5 minutes: http://fotki.yandex.ru/users/sebphotographer/view/490420/ http://fotki.yandex.ru/users/sebphotographer/view/490421/ http://fotki.yandex.ru/users/sebphotographer/view/490422/ Here a crack between the shelf and a body: lol: Actually Romka also didn't plan to close here anything because to me was told: "there it isn't visible"! Well it is necessary to me though that that to do, simply to assemble after all not interestingly. And how попилить whale? ? : mad: At the removed rear screen there will be all for show. http://fotki.yandex.ru/users/sebphotographer/view/490423/ http://fotki.yandex.ru/users/sebphotographer/view/490425/ It was necessary to model. At first so http://fotki.yandex.ru/users/sebphotographer/view/490426/ Then I understood that doesn't suffice and added: http://fotki.yandex.ru/users/sebphotographer/view/490427/ I ground to a trade dress: http://fotki.yandex.ru/users/sebphotographer/view/490431/ The framework assembled without glue and as to put everything accurately and exactly enough difficult that a konsruktion I didn't walk drove everything on pins http://fotki.yandex.ru/users/sebphotographer/view/490432/ http://fotki.yandex.ru/users/sebphotographer/view/490433/ http://fotki.yandex.ru/users/sebphotographer/view/490434/ Well and some photo of on what stopped today: http://fotki.yandex.ru/users/sebphotographer/view/490435/ http://fotki.yandex.ru/users/sebphotographer/view/490436/ http://fotki.yandex.ru/users/sebphotographer/view/490437/ http://fotki.yandex.ru/users/sebphotographer/view/490438/ http://fotki.yandex.ru/users/sebphotographer/view/490441/ http://fotki.yandex.ru/users/sebphotographer/view/490412/ I cut out charts and I prepared for production of thresholds from epoxy http://fotki.yandex.ru/users/sebphotographer/view/492283/ http://fotki.yandex.ru/users/sebphotographer/view/492285/ I remade doors. Now "all as on the original" :P http://fotki.yandex.ru/users/sebphotographer/view/492286/ http://fotki.yandex.ru/users/sebphotographer/view/492287/ I pasted interiors, all in process... http://fotki.yandex.ru/users/sebphotographer/view/492288/ Thresholds with bore under the lock http://fotki.yandex.ru/users/sebphotographer/view/492293/ I threw with a door for descriptive reasons http://fotki.yandex.ru/users/sebphotographer/view/492294/ I cut off tips of tubes of an exhaust and I put metal. It is more realistic on thickness) http://fotki.yandex.ru/users/sebphotographer/view/492297/ I grounded a pro-attendance layer all details. Will dry up and will check. http://fotki.yandex.ru/users/sebphotographer/view/492298/ body http://fotki.yandex.ru/users/sebphot...r/view/492299/ So, to business: Coloring in process http://fotki.yandex.ru/users/sebphotographer/view/496377/ The body is painted by TS26 and it was interesting to show as the engine stands still. On it still there is a lot of work certainly in spite of the fact that it will be visible a little after model end. http://fotki.yandex.ru/users/sebphotographer/view/496378/ Long suffered with masks, as a result I can't still tell the sure missed where that or not http://fotki.yandex.ru/users/sebphotographer/view/496326/ Result such: http://fotki.yandex.ru/users/sebphotographer/view/496328/ http://fotki.yandex.ru/users/sebphotographer/view/496329/ http://fotki.yandex.ru/users/sebphotographer/view/496330/ I painted headlights, I did Alclad II. It nevertheless the best material for metal imitation. Also I painted protection. Here I think to cover it with a semi-opaque varnish or to leave? On mine and so well looks) http://fotki.yandex.ru/users/sebphotographer/view/496332/ It was necessary to remake and recolour an exhaust system. It was painted by Alclad but I had no suitable color. I bought Gunze later, from it is far looks now well. Nevertheless in my case крупновато grain - you will see further. I remade tips, them I made slanted more shortly. Old got out out of bumper limits very strongly. Was: http://fotki.yandex.ru/users/sebphotographer/view/496379/ http://fotki.yandex.ru/users/sebphotographer/view/496380/ Became: http://fotki.yandex.ru/users/sebphotographer/view/496336/ Parts of the engine together: http://fotki.yandex.ru/users/sebphotographer/view/496341/ I can't tell on how many the difference on a photo before and after repaint is strongly visible to you. Result: http://fotki.yandex.ru/users/sebphotographer/view/496345/ http://fotki.yandex.ru/users/sebphotographer/view/496346/ Turbines it is necessary to blow probably, paint from a brush not absolutely exactly laid down. http://fotki.yandex.ru/users/sebphotographer/view/496347/ http://fotki.yandex.ru/users/sebphotographer/view/496348/ I completed the Torpedo. I don't know, it is worth doing with it that that? ? ? http://fotki.yandex.ru/users/sebphot...r/view/496342/ http://fotki.yandex.ru/users/sebphot...r/view/496343/ I hope not strongly I overloaded you with photos and once again excuse for translate |
|
01-30-2013, 10:14 AM | #2 | |
ItaloSvensk
Join Date: Mar 2009
Location: Marstrand
Posts: 3,383
Thanks: 1,077
Thanked 296 Times in 270 Posts
|
Re: Porsche 959 Paris-Dakar 1986 Modellingmaster
ciao sebastian.
great work there, u are really skilled modeller. can we add this nice 959 to our 911 tribute gallery?
__________________
Paolo - LoveGT40 Modelworks website www.alsoldatino.com my YT channel : https://www.youtube.com/channel/UCIp..._as=subscriber FB: https://www.facebook.com/alsoldatino |
|
01-30-2013, 11:09 AM | #3 | |
Blarg! Wort Wort Wort!
Join Date: Mar 2006
Location: Quezon City
Posts: 2,120
Thanks: 64
Thanked 101 Times in 100 Posts
|
Re: Porsche 959 Paris-Dakar 1986 Modellingmaster
wow. real amazing work there!
__________________
olly olly oxen free |
|
01-31-2013, 10:49 AM | #4 | |
AF Enthusiast
Join Date: Jan 2011
Location: Lafayette, Indiana
Posts: 502
Thanks: 7
Thanked 28 Times in 28 Posts
|
Re: Porsche 959 Paris-Dakar 1986 Modellingmaster
Nice photos. Good work.
|
|
02-02-2013, 11:42 AM | #5 | |
AF Regular
Join Date: Apr 2010
Location: Langreo
Posts: 206
Thanks: 1
Thanked 9 Times in 9 Posts
|
Re: Porsche 959 Paris-Dakar 1986 Modellingmaster
Beautiful work and beautiful Photos
|
|
02-08-2013, 10:02 PM | #6 | |
AF Newbie
Join Date: Nov 2010
Location: Grant, Nebraska
Posts: 72
Thanks: 0
Thanked 3 Times in 3 Posts
|
Re: Porsche 959 Paris-Dakar 1986 Modellingmaster
Looks wonderful.. What colour did you use for the blue on the body?
Don |
|
|
POST REPLY TO THIS THREAD |
Tags |
959 , cars , dakar , porsche , rally |
Thread Tools | |
|
|