lambo doors?

[3000gtgrandi]

lambo doors? i want them so bad but i wish someone made a kit for our cars. does anyone know of someone that does or is trying to make one? let me know.

[YogsVR4]

this should give you some insight http://www.3si.org/forum/showthread....ht=lambo+doors













Never pay again for live sex! | Hot girls doing naughty stuff for free! | Chat for free!

[talskinyguy]

www.importprecision.com

[3000gtgrandi]

did anyone ever get this kit from http://importprecision.com./? is it worth the money and does it install fairly easy? i know it going to take some hours but thats not a prob. let me know what you guys think. thanks.

[PennyTomPenny]

Go to www.autothisworld.com they have them in there AND you can push a buttom for the doors to open up

[talskinyguy]

So your telling him to pay 1900 for manual or 2500 for automatic doors with a generic kit. www.importprecision.com sells theirs for 1500 and its specificaly engineered for the 3S platform.

The importprecision kit is on a few cars on 3si, only one has reported a problem that was fixed in a day. The shocks that were sent to him were defective. The importprecision kit can open normally or lambo style depending on how you open your door.

The install process is as follows:
Remove bumper and side skirt so the fender can be removed.
Remove fender
Remove door
Make a small cut so the new braket fits.
Install braket and door
Put fender, side skirt, and bumper back on.
Average joe can do this in a weekend. And the kit even comes with deailed instructions with full color pictures.

If you would like to spend more for a generic product you can have fun with that, but I know where my money is going in the spring.

[911S_TARGA_RSR]

Lambo doors only look good on a lambo.

[Im2Fast4U]

Lambo doors only look good on a lambo.

Thanks, that's helpful and very relevant to his question.

But, ya a few people that I'm aware of have the Import Precision kit and they all have basically nothing but good things to say.

-Jeff

[98MitsuTurbo]

those doors ar sick. Can you do both OEM opening and Lambo at the same time to get a floped open lambo door?SOmewhat like the Mercedes Benz SLR???

Tim

[talskinyguy]

its either or, not both at the same time. but the door does swing out slightly so it clears the a-pillar

[deft_spyder]

i own import precision.... let me know if you have any questions.... although talskinny has done a great job getting my info moved over here.

[TriPocalypse666]

well i have a question...how hard is it to install?.....can one man do it?.....could i do it myself knowig nothing about how car doors really work.........i went to the site and it comes with a graphic handbook/guidebook i heard that helps well....is this true?.....i just really want t no could i do it myself?

[deft_spyder]

The guys that have installed our kit all did it in their garage. It took me about 10 hours for both sides.

The record right now is 6 for the first, 4 for the second. One guy did it by himself, but I had a few friends over helping. Doing the alignment isnt hard, but it helps to have someone holding the door while you tighten down the bolts.

We make our kits only for the car.... no "universal" kits you need to make fit. You do not need to drill, weld or cut our kits.

[The1NamedMarc]

Originally Posted by 911S_TARGA_RSR

Lambo doors only look good on a lambo.

Spoilers only look good on civics.

[sagman82]

Hey deft_spyder,

I've been drowling over the lift kit for awhile now... very nice, but i have a question for you. Can you explain or describe some more regarding how you open the doors oem and vertical when you are inside and outside the car. What action do you take to make the door open the way you want? Thanks


-- Respect the GT