 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
08-13-2004, 12:23 AM
|
#1 | |
|
AF Enthusiast
Join Date: Mar 2004
Location: loveland, Ohio
Posts: 185
Thanks: 0
Thanked 0 Times in 0 Posts
|
first run
Tonight i am going to give my car its first run... i dont really know what to expect from a ls 96 with a greddy evo2 and aem cold air... but i just want to see where i am at now then after a few more mods run it again...
|
|
|
|
|
08-13-2004, 09:45 AM
|
#2 | |
|
AF Enthusiast
Join Date: Nov 2003
Location: Richmond Hill, New York
Posts: 488
Thanks: 0
Thanked 0 Times in 0 Posts
|
well for me with almost the same modes: AEM cold air intake and TSUDO catback exhaust, i ran a 15.9 =/ Very shitty times. I had my power steering and AC belt still on the car with stock timing set at 16 degrees.
If u wanna run a faster time, remove ur PS and AC belts, go to autozone get a timing light and advace your timing to about 18 degrees heres a write up i did on how to advance your timing http://www.automotiveforums.com/vbul...=retard+timing but if u r gonna advance the timing, u need to move the distributor towards the firewall not towards the front of the car(moving to the front retards the timing). U need to line up the white mark on the crank pulley that is closest to the front of the vehicle with the timing mark on the timinign belt cover
__________________
www.MEDIUMRACING.com 
|
|
|
|
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
