Automotive Forums .com - the leading automotive community online! Automotive Forums .com - the leading automotive community online!
Automotive Forums .com - the leading automotive community online! 
-
Latest | 0 Rplys
Go Back   Automotive Forums .com Car Chat > Toyota > Highlander/Highlander Hybrid/Kluger
Reply Show Printable Version Show Printable Version | Email this Page Email this Page | Subscription Subscribe to this Thread
 
Thread Tools
Old 01-22-2005, 12:49 PM   #1
Ed 50
AF Newbie
 
Join Date: Jan 2005
Location: Omaha, Nebraska
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Question 2004 Highlander transponder key programming

Does anyone know how to program a transponder key for a 2004 toyota highlander? I purchased two blanks from e-bay. One is for a transponder bypass for an auto start, so it doesn't need to be cut. I've tried the "turn key on/off 5 times, open and close the door 6 times, remove good key and install key to be programmed. Wiated for the security light to quit flashing, but it never. HELP
Ed 50 is offline   Reply With Quote
Old 06-01-2005, 09:30 AM   #2
CloneNum3
AF Newbie
 
Join Date: Dec 2004
Location: Madison Heights, Michigan
Posts: 13
Thanks: 0
Thanked 0 Times in 0 Posts
Make sure you are using the Primary Key, not the Valet key to program the new transponder.
CloneNum3 is offline   Reply With Quote
Old 12-31-2011, 07:23 PM   #3
sasdjt
AF Newbie
 
Join Date: Dec 2011
Location: Raleigh, North Carolina
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 2004 Highlander transponder key programming

Here are instructions that apparently work (from http://www.keylessfobprogramming.com...try-fob-remote)

How to Program a 2004 Toyota Highlander Keyless Entry Fob Remote

*Warning* If you have replaced the battery in your current keyless entry remote and the remote is still not working, this is a good indication that the keyless entry remote will need to be replaced.

Get in the drivers side of the vehicle, make sure all the doors are closed except the drivers side door and all the door locks are unlocked.

Insert the key into the ignition without turning and remove it quickly

Insert the key into the ignition without turning and remove it quickly

Close the drivers side door, then open it.

Close the drivers side door, then open it.

Insert the key into the ignition without turning it and remove it quickly.

Close the drivers side door, then open it.

Close the drivers side door, then open it.

Insert key into the ignition (do not remove, do not turn).

Close the drivers side door.

Turn key to “On”, then to “Off”

Remove the key

Vehicle locks should lock and then unlock to signify programming mode. If not, repeat above steps.

Press and hold “Lock” and “Unlock” on the keyless entry remote simultaneously for 2 seconds.

Let go of the buttons and quickly press the “Lock” button (by itself) on the keyless entry remote and hold it for 2 seconds.

Doors should lock and unlock to signify successful programming

Repeat 2 previous steps to program additional remotes

Open the drivers side door to exit programming mode.
sasdjt is offline   Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums .com Car Chat > Toyota > Highlander/Highlander Hybrid/Kluger

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 08:41 AM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts