Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
240Z | 260Z| 280Z | 300ZX (Past Z Cars) The original Z cars - ones that started it all. |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
05-06-2007, 09:14 PM | #1 | |
AF Newbie
Join Date: May 2007
Location: charlotte, North Carolina
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Hi! Help! z32 hesitation
My 91 Zed has been running piss poor lately. Feels like its choking and hesitating the worst in the 3-4 rpm range. Couple of issues I know of, but what could it be? Compression test show one cylinder running a little low (%68)? Exhaust leak around the cats? Once it gets above 4,5 rpm its runs a little better, but still rough. Feels the worst when maintaining a set speed. It is a 5spd N/A if that helps. Anyone got any clue about what it could be?
|
|
05-06-2007, 09:24 PM | #2 | |
AF Fanatic
|
Re: Hi! Help! z32 hesitation
have you ran the ecu diagnostic on it?
__________________
ZedEx Crew Member #6 1988 300zx turbo 5spd. 3" mandrel exhaust, filter, afco rad, e-fan, poly engine mounts, mbc at 8.5 psi, turboxs rfl-h bov, gutted plenum, etc. blown turbo, under construction.. gt35 coming. |
|
05-06-2007, 09:30 PM | #3 | |
AF Newbie
Thread starter
Join Date: May 2007
Location: charlotte, North Carolina
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Hi! Help! z32 hesitation
No. I did try to get advanced to run one the other night while I was there, but its past their age limit. Just trying get an idea of what it could be before taking it somewhere. Check Eng light not on either, though I know that doesnt mean its not throwing any codes.
|
|
05-06-2007, 09:35 PM | #4 | |
AF Fanatic
|
Re: Hi! Help! z32 hesitation
it's not that difficult to run them yourself, especially if you've got a factory service manual
__________________
ZedEx Crew Member #6 1988 300zx turbo 5spd. 3" mandrel exhaust, filter, afco rad, e-fan, poly engine mounts, mbc at 8.5 psi, turboxs rfl-h bov, gutted plenum, etc. blown turbo, under construction.. gt35 coming. |
|
05-06-2007, 10:01 PM | #5 | |
AF Newbie
Thread starter
Join Date: May 2007
Location: charlotte, North Carolina
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Hi! Help! z32 hesitation
I guess, but I dont have the equipment. Ive seen software for laptops, but I dont have the cables. Just thinking someone might have had similar problem or an idea if it could be compression or the cats. I read one post of someone having the cats being leaked on by the exhaust (and I have a leak there) causing somewhat similar symptoms. I know its not a science, just looking for some more clues so I can work on it myself. Indeed thanks for the reply and any additional info.
|
|
05-07-2007, 01:14 AM | #6 | |
AF Fanatic
|
Re: Hi! Help! z32 hesitation
what do you mean the equipment? you need a small flathead screwdriver, and whatever to pull the interior panel off...
__________________
ZedEx Crew Member #6 1988 300zx turbo 5spd. 3" mandrel exhaust, filter, afco rad, e-fan, poly engine mounts, mbc at 8.5 psi, turboxs rfl-h bov, gutted plenum, etc. blown turbo, under construction.. gt35 coming. |
|
05-07-2007, 10:32 PM | #7 | |
AF Newbie
Thread starter
Join Date: May 2007
Location: charlotte, North Carolina
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Hi! Help! z32 hesitation
I thought you were refering to a engine diagnostic where you plug in the tool to read thrown codes. I will give the ecu diagnostic a try and post the codes. Thanks!
|
|
05-08-2007, 05:24 PM | #8 | |
AF Enthusiast
Join Date: Aug 2004
Location: Mooresville, North Carolina
Posts: 1,104
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Hi! Help! z32 hesitation
He is refering to the diagnostic..... Nissan was nice enough to make this possible with or without a computer scan tool. All you need is a flat head screwdriver and a flashlight helps. You can look at the FSM (factory Service Manual) On 300ZX.org. Odds are your probly looking at best case, bad plugs, or worst case blown headgasket.
__________________
Finaly got pics of my car....... after I washed it of course. |
|
|
POST REPLY TO THIS THREAD |
|
|