Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
11-09-2003, 08:18 PM | #1 | |
AF Newbie
Join Date: Nov 2003
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
window handle remover
Does anyone know how to remove the window crank from my ford ranger? I have tried sooooo hard and i'm getting frustrated that i can't get it off to install my speakers. Please someone help me. ASAP
|
|
11-10-2003, 07:59 PM | #2 | |
AF Enthusiast
Join Date: Sep 2003
Posts: 230
Thanks: 0
Thanked 0 Times in 0 Posts
|
If it's like mine you have to remove the cover on the handle with a flathead screwdriver. after that, at the pivot area there is a torx screw that you have to remove, and the handle should pull right out. what kind of speakers are you installing. I recently blew mine.
Hope this helps. Good luck. |
|
11-18-2003, 03:47 PM | #3 | |
AF Newbie
Join Date: Oct 2003
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Most likely it is like all the other newer cars in the world, take your handle and pull it towards you between the crank and the doorpanel if you look behind it there is a little clip that looks like this
__ ( ) ) ( Pop it out with a Flathead screwdriver, but dont lose it because your crank wont stay back on without it. Pull the crank towards ya and your handle is off. |
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|