Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
10-24-2004, 01:15 PM | #1 | |
AF Regular
Join Date: Jan 2004
Location: point, Texas
Posts: 115
Thanks: 0
Thanked 0 Times in 0 Posts
|
HP ratring ???
i just recently aquired an LT1 from a 94 buick roadmaster and was wondering if anyone here might know the HP rateing on this motor.
was there more than 1 motor offered in this car and if so which ones??? i dont know if any of this info is relevent.....mine has a camshaft driven water pump, and round exhaust ports. |
|
10-24-2004, 04:14 PM | #2 | |
AF Newbie
Join Date: Jan 2004
Location: Indianapolis, Indiana
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: HP ratring ???
Lets see...
In 91' a 170hp 5.0 V8 In 92' they switched to a 180hp 5.7 V8 In 94 they switched to the 260hp LT1 5.7 V8, the same(although modified) engine they use in the corvettes, camaros, firebirds, and a caddy or two. They used the LT1 up until 96' when they stopped making roadmasters. |
|
10-24-2004, 10:39 PM | #3 | |
AF Regular
Thread starter
Join Date: Jan 2004
Location: point, Texas
Posts: 115
Thanks: 0
Thanked 0 Times in 0 Posts
|
what would a stock compression reading for the 260 hp motor be?
i checked mine and got 220 psi on all 8 cyl. of mine, almost impossible to turn over by hand ( with the proper tools of course) w/ the plugs in it. i removed the plugs and tested all 8 cyl. these results seem a little high to me though. mabie its just because this motor is new to me and i use to the older 350's. |
|
|
POST REPLY TO THIS THREAD |
|
|