Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
10-20-2004, 05:48 PM | #1 | |
AF Newbie
Join Date: Oct 2004
Location: Merrilville, Indiana
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
Code P0301 misfire cyl #1 Help!
I just bought a 1999 Buick Park Ave. ( not a Ultra). It gives me a code P0301 (#1 cyl eng misfire). It only happens at 4500 to 5000rpm when accelerating onto the highway. I don't normally push it that hard only when I need to. I have changed the wires, plugs,all the coil packs, air filter, and gas filter. I don't know if I should change the control module located under the coil packs ($160.00) or have the injectors cleaned by a shop. I have checked the injectors with an ohm meter and they are very close in ohms to each other. I am new to this forum and any help would be greatly appreciated. Each time I have worked on the car I have erased the code and it still pops up at 4500-5000 rpm.
|
|
10-20-2004, 06:31 PM | #2 | |
AF Enthusiast
Join Date: Apr 2004
Location: Orlando, Florida
Posts: 1,463
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Code P0301 misfire cyl #1 Help!
Try some fuel injection cleaner. These cars have known issues with injectors plugging up. Good Luck.
|
|
10-21-2004, 08:28 AM | #3 | |
AF Regular
Join Date: Nov 2003
Posts: 339
Thanks: 0
Thanked 0 Times in 0 Posts
|
the injector is either bad or clogged. A bottle of K100G does wonders!
|
|
|
POST REPLY TO THIS THREAD |
|
|