 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
06-30-2015, 07:41 PM
|
#1 | |
|
AF Newbie
Join Date: Jun 2015
Location: Williams lake
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
I'm having code P0341 come up, replaced the cam poss sensor still stumbles under load
2004 chev optra 2.0 L d-tec engine stumbles under load much worse with ac on. I replaced the cam position sensor and still the same problem. I get battery voltage on one terminal at the cps connector and continuity at the ground wire. The third wire I believe is for the return signal to the ecm. I don't know how to check that. Has anyone had the same problem and found a solution?
Thanks in advance. |
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
| Thread Tools | |
|
|
