Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
03-15-2004, 11:50 AM | #1 | |
AF Newbie
Join Date: Mar 2004
Location: Melbourne, Florida
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Need Help Removing Alternator Bracket
I need to replace the coupler in the nosepiece of the supercharger on my 1994 Buick Park Avenue Ultra (3800 V-6). In order to remove the nosepiece from the supercharger body, I need to remove the 8 attaching bolts. To get at two of the bolts, I need to remove the bracket which supports the alternator and the power steering pump. So far, I've removed the stud into the nosepiece, the tensioner (attached to the bracket), the alternator, and three bolts into the block ... but the bracket won't budge!
It would really help if anyone has a diagram of the bracket that shows how many points (and where) the bracket is connected to the block ... or I may never get the coupler replaced! |
|
03-16-2004, 07:56 PM | #2 | |
Pimpin' ain't easy
|
Re: Need Help Removing Alternator Bracket
The tensioner bracket has bolts that extend downward along the rear of the engine, there are quite a few if I recall.
__________________
|
|
03-18-2004, 10:59 AM | #3 | ||
AF Newbie
Thread starter
Join Date: Mar 2004
Location: Melbourne, Florida
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Re: Need Help Removing Alternator Bracket
Quote:
|
||
03-18-2004, 02:30 PM | #4 | |
Pimpin' ain't easy
|
Re: Need Help Removing Alternator Bracket
oh, you have the SC engine? (I just noticed the year and trim, and put 2 and 2 together. I've not seen a SC series 1 up close, but the power steering pump is in a different location. I'm sorry, i saw 3800 v-6 and thought that it was the regular engine.
__________________
|
|
|
POST REPLY TO THIS THREAD |
|
|