Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
B-Series/Bravo/Bounty/Drifter Bravo is the Australian vesion, Bounty the New Zealand version and Drifter the South African version. |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
08-01-2005, 08:55 PM | #1 | |
AF Newbie
Join Date: Aug 2005
Location: Beverly Hills, Florida
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
90 B2200 vacuum diagram 2.2L
Hello, Does anyone out there have a BIG vacuum diagram for a 90 B2200 with a 2.2L? I saw the post that "BadassRx-7 posted a while ago, helpful if you have a 2.6L. I have a 2.2L. I have the Chiltons manual that has the same diagram as "BadassRx-7" in it. I'm not sure what the differences if any there are between the 2.6 & the 2.2, but I would think if there wasn't any Chilton's would have put "vacuum diagram for 2.2L and 2.6L" Also does a 2.2L have a "mixture control valve"? If so, where is it? The 2.6L has it right in front of the carb, towards the passenger side. I don't see anything on mine that looks to be a control valve. Any help would be great. catchinzs@earthlink.net
Here are the posts from "badassRx-7", in case you need them. http://files.automotiveforums.com/ga...00vac00150.JPG http://files.automotiveforums.com/ga...code75-med.JPG |
|
08-04-2005, 01:22 PM | #2 | |
AF Newbie
Join Date: Apr 2004
Location: Surrey
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
I will try emailing you the vacuum diagram, I found this one to be accurate for my '91 B2200. As for the fuel mixture, it is on the passenger side of the carb, in the middle, and it has two circular holes one above the other, but there is a tamper proof pin in front of the mixture screw which is the lower hole. You will need to remove the carb, turn it over and drive the pin out with a punch.
|
|
08-04-2005, 06:11 PM | #3 |
AF Regular
|
__________________
Owner of Mazdatruckin.com |
|
POST REPLY TO THIS THREAD |
|
|