Automotive Forums .com - the leading automotive community online! Automotive Forums .com - the leading automotive community online!
Automotive Forums .com - the leading automotive community online! 
-
Latest | 0 Rplys
Go Back   Automotive Forums .com Car Chat > Engineering/Technical
Engineering/Technical Ask technical questions about cars. Do you know how a car engine works?
Reply Show Printable Version Show Printable Version | Email this Page Email this Page | Subscription Subscribe to this Thread
 
Thread Tools
Old 05-17-2018, 08:26 PM   #1
nealm
AF Newbie
 
Join Date: May 2018
Location: Marlboro, New Jersey
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Please help ! Need to program key Fob.

I have an Infiniti G37 (2011). I used Nissan Consult III Plus to enter the pin and start programming new Key Fobs.

I was able to clear the existing keys , but am not able to program the new Fob(s).

Consult III provides instructions, but the Key light never blinks 5 times as it indicates that it should.

I have tried all 3 options:

Replace ECM (used part)
Replace BCM
Register Key

For each options, it gets stuck at the same place. Please help me understand the sequence of commands I need to program the new Keys.

This is a Push to start vehicle and is completely stuck right now.

Thanks,

Neal M.
nealm is offline   Reply With Quote
Old 05-18-2018, 06:47 AM   #2
shorod
SHO No Mo
 
shorod's Avatar
 
Join Date: Jun 2004
Location: Cedar Rapids, Iowa
Posts: 10,946
Thanks: 99
Thanked 350 Times in 344 Posts
Re: Please help ! Need to program key Fob.

Does the Consult III or service manual indicate if there are any initial conditions that need to be satisfied before programming, such as all doors closed, hood open, etc.?

Not that it matters now, but why did you clear all the fobs before programming new? Usually you can add additional fobs without clearing the original ones. I don't know if that might be part of the issue.

I've done this process on Fords, Mercedes, and Chrysler, but never had to do it on my former G35 so I'm not familiar with the specifics.

-Rod
shorod is offline   Reply With Quote
Old 05-18-2018, 07:19 AM   #3
nealm
AF Newbie
Thread starter
 
Join Date: May 2018
Location: Marlboro, New Jersey
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Please help ! Need to program key Fob.

This is required for programming new Intelligent Keys.

You do not have the option of adding new without erasing the old ones. Do you know anyone familiar with Consult III or Nissan cars ?

Thanks.
nealm is offline   Reply With Quote
Old 05-18-2018, 01:13 PM   #4
shorod
SHO No Mo
 
shorod's Avatar
 
Join Date: Jun 2004
Location: Cedar Rapids, Iowa
Posts: 10,946
Thanks: 99
Thanked 350 Times in 344 Posts
Re: Please help ! Need to program key Fob.

Yeah, you could try the Infiniti G forum within Automotive forums here or you could go to the manufacturer-specific forum and select your model (coupe or sedan). There are some folks there that know these cars quite well. There's also a Knowledgebase that has factory service manual information available. I'm a moderator over there as well (same username) so if you have issues you can let me know.

-Rod
shorod is offline   Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums .com Car Chat > Engineering/Technical

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:12 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts