Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Slot Car Modeling Discuss and show Slot Cars that you have modified, or that you have collected. |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
11-24-2007, 07:36 PM | #1 | |
AF Newbie
Join Date: Nov 2007
Location: Eugene, Oregon
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
1964 Cheetah
For those who were, or are, slot car racing aficionados and remember some of the 1960's ready to race offerings, namely Cox, here's my just completed restoration of Cox's famous and highly sought after (in any condition) 1/24th Bill Thomas Cheetah I recently purchased on E-Bay.
From this................. .........to this As most would agree, the Cheetah, in spite of it's less than sterling race record, is a motor-head’s esthetic delight, and so was the Cox version. Here's my rework of an old Cox slot car I recently purchased on Ebay. I incorporated a Resilient Resin Windshield and headlamp covers, Pro-Track rims/tires, and VRM aftermarket decals. Of course the original chassis was even by '60's standards a no-go, so in keeping with Pelican Park Speedway's building methods I scratch built a new dedicated chassis. Some GM dealers were involved with racing Cheetahs- Dixon Cadillac, Citation Motors and Alan Green Chevrolet. Applying a little artistic license I did mine as a Washburn Chevrolet sponsored Cheetah. Washburn sponsored a 62 Corvette and a 63 Stingray raced at Cal Club SCCA regional races. The number on its cars, 614, derived from Washburn's street address, 614 Chapala St., Santa Barbara. Fujimi Driver kit Couldn't find a 64 California dealer plate, so used a CA Mfg plate. |
|
11-26-2007, 10:56 PM | #2 | |
Supermodified
Join Date: Sep 2003
Location: Lorain, Ohio
Posts: 3,374
Thanks: 0
Thanked 8 Times in 8 Posts
|
Re: 1964 Cheetah
It's interesting to see a "scale racing" oriented club on a commercial sized track. Even though I'm from the race car side of the aisle (we use lexan and laser cut EDM steel) I think that the scale guys have something cool going on all the same.
__________________
Proud Owner/Operator of Haven Raceway and Hobby! |
|
11-27-2021, 12:47 AM | #3 | |
AF Newbie
Join Date: Nov 2021
Location: Philadelphia, Pennsylvania
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1964 Cheetah
An obligation of appreciation is all together for the consistently supportive exercise. Accomplishes the best result! The approach worked for me as a result of the space individuals for the procedure.
|
|
|
POST REPLY TO THIS THREAD |
|
|