Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Pathfinder | Terrano | QX4 | Xterra | Patrol | Safari | X-Trail Nissans greatest 4WDs and SUVs |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
06-23-2008, 09:28 PM | #1 | |
AF Newbie
Join Date: Dec 2001
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
|
Trouble Removing Slider Pin Bolt from Brakes
I am doing a front brake change on our '01 Xterra 4x4. My problem occurs as I turn the bolts with a ratchet, they loosen but do not come off. I don't get it. I keep turning and I feel like they become loose but I can't pull them out or anything. Is there some trick I don't know about or am I just having bad luck?
In Summary -Tried to change brakes but I can't pull the pin bolts out. -They just keep turning. Thanks in advance.
__________________
'92 240SX Wish List: Lancair 360 |
|
06-24-2008, 02:50 AM | #2 | |
AF Regular
Join Date: Oct 2007
Location: Long Island, New York
Posts: 216
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Trouble Removing Slider Pin Bolt from Brakes
Just pull em out with your fingers.. get a good grip on them with a rag or something non-slip.. pliers may work as well
|
|
06-24-2008, 11:59 AM | #3 | |
AF Newbie
Thread starter
Join Date: Dec 2001
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Trouble Removing Slider Pin Bolt from Brakes
Thanks.
I figured out the problem though, the nut that it is attached to was rolling with the pin and it would not loosen. Just keep spinning.
__________________
'92 240SX Wish List: Lancair 360 |
|
|
POST REPLY TO THIS THREAD |
|
|