Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
07-21-2009, 04:33 PM | #1 | |
AF Newbie
Join Date: Jul 2009
Location: red wing, Minnesota
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
2000 b1500 5.2 pcm issue help.
I am having the same symptoms as everyone else. Runs good when cold, stalls at lights, stalls in general, no bus error, etc. Heres the thing, I pulled the pcm just to have a look inside for fun. Hooked it back up and started van. Van ran good so I started to bolt the pcm back in with van running. As soon as the first bolt sucked the pcm to the bracket, van quit. Hmmm so I removed the pcm and let it sit on top of the radiator hose and still couldnt get it running. finally after a while it started again and I started bolting it again and bam, as soon as it touched the metal it quit. I have tried to run it not touching the metal and that doesnt fix it. Only time fixes it. What should I try next? New pcm? Thanks in advance for any help I may recieve.
|
|
07-21-2009, 07:08 PM | #2 |
AF Enthusiast
Join Date: Mar 2005
Location: 0,0,1
Posts: 722
Thanks: 1
Thanked 25 Times in 24 Posts
|
Re: 2000 b1500 5.2 pcm issue help.
|
07-21-2009, 08:32 PM | #3 | |
AF Newbie
Thread starter
Join Date: Jul 2009
Location: red wing, Minnesota
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 2000 b1500 5.2 pcm issue help.
What do you think about the issue when the pcm hits metal and shuts off the van? Maybe a open circuit in the pcm that is shorted to the case? Of course I cant seem to find one anywhere in minnesota. Ebay may be the only option. What am I going to spend on one? Does it have to be flashed to my VIN? Thanks
|
|
07-21-2009, 09:52 PM | #4 | |
AF Newbie
Thread starter
Join Date: Jul 2009
Location: red wing, Minnesota
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 2000 b1500 5.2 pcm issue help.
Okay I got it to run in 15 sec spurts. Everytime it killed it was due to the fuel pump relay dropping out. So does this still point to PSM replacment?
Thanks |
|
07-21-2009, 10:02 PM | #5 | |
AF Enthusiast
Join Date: Mar 2005
Location: 0,0,1
Posts: 722
Thanks: 1
Thanked 25 Times in 24 Posts
|
Re: 2000 b1500 5.2 pcm issue help.
Since the PCM controls the fuel pump relay, you're still faced with the possibility of a bad PCM.
Try these sites: http://stores.shop.ebay.com/Auto-Com...&submit=Search http://car-part.com/ |
|
07-22-2009, 08:21 PM | #6 | |
AF Newbie
Thread starter
Join Date: Jul 2009
Location: red wing, Minnesota
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 2000 b1500 5.2 pcm issue help.
Okay I thought that the truck and the van ecm's were the same. Nope. I cant seem to find my ecm with any junkyards or rebuilders. Anyone that can help?
Part number is: p56040389ab |
|
07-22-2009, 09:05 PM | #7 | |
AF Enthusiast
Join Date: Mar 2005
Location: 0,0,1
Posts: 722
Thanks: 1
Thanked 25 Times in 24 Posts
|
Re: 2000 b1500 5.2 pcm issue help.
http://www.autocomputerexchange.com/Product/135
$254.00 Rebuilt |
|
07-22-2009, 09:11 PM | #8 | |
AF Enthusiast
Join Date: Mar 2005
Location: 0,0,1
Posts: 722
Thanks: 1
Thanked 25 Times in 24 Posts
|
Re: 2000 b1500 5.2 pcm issue help.
Oh and by the way, the number for your PCM is just 56040389ab, there is no "p" at the front of it.
|
|
|
POST REPLY TO THIS THREAD |
|
|