Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
'88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
08-02-2002, 03:32 PM | #1 | |
AF Enthusiast
Join Date: Apr 2002
Posts: 294
Thanks: 0
Thanked 0 Times in 0 Posts
|
brakes wont stop squeaking
my brakes have been squeaking lately i looked at them and the pads are fine. What can be done to correct this problem?
Chad
__________________
B C kit motegi 15's tenzo R seats 3'' exhaust 5'' tip |
|
08-02-2002, 04:44 PM | #2 | |
worlds tallest midget
Join Date: Apr 2002
Location: Spokane, Washington
Posts: 6,212
Thanks: 0
Thanked 0 Times in 0 Posts
|
Did you check ALL the pads? Similar thing happened to me, brakes were grinding, so I checked my pads, and they looked fine, but when I pulled off the calipers, the inside pads were down to bare metal...
__________________
|
|
08-02-2002, 05:45 PM | #3 | |
AF Fanatic
|
squeaking brake can alos happen as a result of brake dust on the rotor or drum. you should spray the brakes down with brake cleaner and and then drive it and see if it still happen
|
|
08-02-2002, 07:56 PM | #4 | |
AF Enthusiast
Join Date: Jan 2002
Posts: 113
Thanks: 0
Thanked 0 Times in 0 Posts
|
Another possibility is that the pads were either installed without using anit-squeal/brake quiet compound or that the stuff needs to be redone (rare). Also check that there is a little anti-seize on the backing plate edge; there is a tab area about 3/4" long and the compound goes on the edge.
Squealing is also due to pads that are glazed from improper break-in or over heating. For your benefit: My tech recommends that Honda pads be beeded in by driving the car at 40mph and stopping smoothly 3 times-each application should be for about 10 seconds and you need to allow for a little cooling. Do this process several addtional times, park the car to allow everything to cool down and then drive gently for 100 miles.
__________________
Grandpa toys-Modded suspensions and other tweaks '89 CRX Si PDA/NASA/SCCA/Steel Cities ITA pocket rocket '99 Prelude Base SS - A Sweet Song in Motion '03 Dodge Dakota Club Cab-gonna tow the CRX Last edited by jc836; 08-03-2002 at 05:50 AM. |
|
08-03-2002, 01:14 AM | #5 | |
AF Enthusiast
Thread starter
Join Date: Apr 2002
Posts: 294
Thanks: 0
Thanked 0 Times in 0 Posts
|
thank you for all your help
Chad
__________________
B C kit motegi 15's tenzo R seats 3'' exhaust 5'' tip |
|
08-03-2002, 01:57 AM | #6 | |
AF Moderator
Join Date: Jul 2002
Location: Homeless, Illinois
Posts: 6,216
Thanks: 1
Thanked 14 Times in 13 Posts
|
you can apply moly coat on the back of the pads the reduce noise, heat, wear
|
|
|
POST REPLY TO THIS THREAD |
|
|