Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Engineering/Technical Ask technical questions about cars. Do you know how a car engine works? |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
03-25-2002, 11:47 AM | #1 | |
AF Newbie
Join Date: Dec 2001
Posts: 23
Thanks: 0
Thanked 0 Times in 0 Posts
|
need the stock bore diameter for a gs-r
all i need is the bore diameter in either inches or millimeters it doesn't matter to me which one thanx for your help
__________________
Ahh the 3rd gen Prelude, how can we best describe you, middle child, unloved, forgotten, or untapped power you be the judge. have four never been used ITR pistons and rings with .25 overbore if your interested email me |
|
03-25-2002, 01:05 PM | #2 | |
AF Newbie
|
ok, the specs for the 3rd gen ('94-'01) say the bore is 3.19" (81mm)
|
|
03-26-2002, 01:34 PM | #3 | |
AF Newbie
Thread starter
Join Date: Dec 2001
Posts: 23
Thanks: 0
Thanked 0 Times in 0 Posts
|
thanx for the info im going to need it getting my block overbored and just wanted to make sure the numbers i needed to tell them
__________________
Ahh the 3rd gen Prelude, how can we best describe you, middle child, unloved, forgotten, or untapped power you be the judge. have four never been used ITR pistons and rings with .25 overbore if your interested email me |
|
|
POST REPLY TO THIS THREAD |
|
|