Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Engineering/Technical Ask technical questions about cars. Do you know how a car engine works? |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
12-12-2002, 01:15 AM | #1 | |
AF Newbie
Join Date: Nov 2002
Posts: 22
Thanks: 0
Thanked 0 Times in 0 Posts
|
help with throttle body
I just installed a BBK throttle body. Worked fine then it started reving. It revs on and off from 2 to 3. Why is this? Please help.
|
|
12-12-2002, 08:07 AM | #2 | |
AF Newbie
|
It did come with its own map sensor and tps right? Just check to make sure those 2 connectors arent switched. And make sure your codes are reset by pulling the "backup" fuse for about 10 seconds and putting it back in. Then assure that your throttle cable is not too tight.
__________________
www.nexusmotorsports.net |
|
12-12-2002, 08:31 AM | #3 | |
AF Newbie
Join Date: Jan 2002
Posts: 28
Thanks: 0
Thanked 0 Times in 0 Posts
|
HAve you checked to make sure you don't have a vacuum leak or something, or maybe air is being sucked in around the throttle body. If I was you i would get like some wd40 and spray around and see if it stops. This might help, I'm not real sure.
|
|
12-12-2002, 01:18 PM | #4 | |
Slowest Automatic Civic
|
sounds like an air leak to me also, but first check your connections, then spray water around the outside of the TB where it contacts the runners, if you see bubbles form, then you have a leak.
__________________
Name: Scott Stable Of Cars I have Owned: 1991 Honda CRX 1990 Oldsmobile Cutlass Supreme 2003 Honda Accord 1998 Chrysler Concorde 2007 Honda Civic 1997 Toyota Camry 1995 Saturn SC2 1996 Ford Taurus 1991 GMC Sierra 2002 Daewoo Leganza 1999 Dodge Ram 2007 Honda CR-V 2003 BMW 325i |
|
|
POST REPLY TO THIS THREAD |
|
|