 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
01-20-2011, 09:52 PM
|
#1 | |
|
AF Newbie
Join Date: Jan 2011
Location: Baltimore, Maryland
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Trouble reconnecting TV cable
Just replaced the head on my 96 Beretta. Am putting everything back together & cannot get the the throttle plate to close because there isn't enough slack in the cable . These are the same parts I took off to do the job. Nothing different. Any help would be appreciated.
|
|
|
|
|
01-21-2011, 06:42 AM
|
#2 | |
|
AF Regular
Join Date: Oct 2010
Location: cambridge, ontario
Posts: 160
Thanks: 0
Thanked 18 Times in 18 Posts
|
Re: Trouble reconnecting TV cable
The TV cable will not hold the throttle open. Must be a problem with the throttle cable. What engine is it? The 2.2 can do it with the cables reversed, when you try and step on the pedal does it open the throttle? I know it sounds silly. With the 3.1 I have seen a bent cable bracket do it. May have bent the bracket when it was off, i have done that once. no idea why but it was bent slightly when i put one together.
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
