Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Cutlass Series Includes Cutlass Ciera, Cutlass Cruiser, Cutlass Calais, Cutlass Supreme, Custom Cruiser, as well as the GM N-Body subforums. |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
07-31-2007, 09:00 PM | #1 | |
AF Newbie
Join Date: Jul 2007
Location: Wilton, Maine
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Brake lights
Hi I have a 1995 olds cutlass supreme and the brake lights are inop. Actually the outer lights are out but the 3rd brake light operates fine. I checked the fuse and its ok. Checked power out of brake light switch and its ok as well. Got wiring diagram and traced wire from brake light switch to turn signals as the brake lights run through this. I have power going into switch(turn signal) but nothing coming out. Removed airbag and steering wheel, replaced switch and reassembled. Still have no power out of turn signal switch to apply power to outer brake lights. What am I missing? Anyone have an issue like this? Seems simple enough but yet there is something I am overlooking. Please help. Thanks. Oh and the part was OEM.
|
|
08-02-2007, 12:56 PM | #2 | |
out saving the world
Join Date: Jul 2005
Location: Yourtown, Indiana
Posts: 10,707
Thanks: 8
Thanked 18 Times in 18 Posts
|
Re: Brake lights
Welcome to AF.
DId you check all of the fuses related to the brake lights/turn signals ??? I know thiers more then 1. Did you test for power at the rear, on the light housing wires ??? Sounds dumb, but did you check the bulbs ?? What about the bulb sockets ? If those check out OK, look for the ground wire thats attached in the truck somewhere.... not sure exactly where but if its not makin contact they may not work either.
__________________
1999 Grand Am SS 3.4 OHV |
|
|
POST REPLY TO THIS THREAD |
|
|