Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
07-08-2005, 02:06 PM | #1 | |
AF Newbie
Join Date: May 2005
Location: langhorne, Pennsylvania
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
shaking
my car shakes when it is reved over 4000 rpm. any ideas? please post
|
|
07-09-2005, 03:32 PM | #2 | |
AF Ford Contour-Advisor
Join Date: Mar 2003
Posts: 1,815
Thanks: 0
Thanked 2 Times in 2 Posts
|
V6 or I4?
__________________
"The CEG Nazi" www.contour.org 1996 Ford Contour SE - Sold 3.0L V6 and Arizona Dyno Chip Turbo Kit 364 whp, 410 wtq @ 16 psi and only 4,700 rpms. 1999 Tropic Green SVT Contour - Bone stock and MINT |
|
07-11-2005, 01:28 PM | #3 | |
AF Newbie
Thread starter
Join Date: May 2005
Location: langhorne, Pennsylvania
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
|
I 4
|
|
01-25-2008, 07:56 PM | #4 | |
AF Newbie
Join Date: Jan 2008
Location: tallahassee, Florida
Posts: 63
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: shaking
to me it sounds like out of balance wheels or out of round tire/rim.
Most likely, here's what's going on in this situation - first off, the wheels probably aren't rotating evenly. Consequently, they vibrate when the vehicle is driven. At a certain speed, the wheels begin to vibrate severe enough to cause certain suspension components to also vibrate which then causes the entire vehicle to vibrate. Now, you may be asking, "What causes a wheel to rotate unevenly?" Well, there are two possibilities. First, if a wheel is "Out Of Balance", its weight distribution is disproportionate, thus making for uneven rotation/vibration. Second, a tire or rim could be what's called "Out Of Round", a rarer condition in which the tire/rim isn't perfectly/precisely round (usually due to a manufacturing error). As a result, the tire/rim will rotate awkwardly and thus vibrate as the vehicle is driven. Have all four wheels balanced. There are two methods of balancing - static, with the wheels off the vehicle, and dynamic, with the wheels on. The dynamic method is best since it takes into account the brake disk (or drum) and its influence on a wheel's balance. While the mechanic is balancing the wheels, he'll be able to determine if a wheel's tire or rim is "out of round". The wheel balancing procedure will usually correct a mild out of round condition. However, if a certain tire/rim is extremely out of round, it will need to be replaced. hope this helps Terrell |
|
09-14-2009, 02:38 PM | #5 | |
AF Newbie
Join Date: Sep 2009
Location: colchester
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: shaking
this sounds like my problem i have a 3rd gen minivan which shakes at 35-40mph only and only when i am on the gas, foot off and the vibrating/shaking stops.
|
|
|
POST REPLY TO THIS THREAD |
|
|