Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
09-15-2003, 09:06 PM | #1 | |
AF Newbie
Join Date: Sep 2003
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
anyone know how to program keyless entry remote for 96 camry?
Does anyone know how to program a keyless entry remote for a 1996 Camry? Or does anyone know where I can read instructions to do this??? Thanks
|
|
03-06-2004, 02:55 PM | #2 | |
AF Newbie
Join Date: Mar 2004
Location: denver, Colorado
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
96 camry remote programming
If anyone can answer this I've been searching the net for this info for quite some time and cannot seem to find anything. Thanks
|
|
03-06-2004, 03:36 PM | #3 | |
AF Newbie
Join Date: Mar 2004
Location: Romeoville, Illinois
Posts: 70
Thanks: 0
Thanked 0 Times in 0 Posts
|
If it is a Toyota system, there should be a control unit under the drivers seat. It's a black box with a few electrical connectors plugged into it. This might be a 2 person job, but if it's a Toyota, this will work.
There is a small green button on the control unit, it's kind of recessed, and you'll need to get a small screwdriver to get to it. All the doors must be closed, so the best bet is to push the drivers seat all the way forward, and access the control unit from the back seat. I suggest leaving the rear door open and kind of lay on the ground/back floor of the car, and have someone else hold the door switch closed, as if the door were actually closed. Key on, door switches all closed, press that green button, and wait about 5 seconds..... press the button on the remote. You'll hear a beep, and you are done. Any problems, e-mail me at cignasak@comcast.net |
|
|
POST REPLY TO THIS THREAD |
|
|