 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
07-10-2011, 11:23 AM
|
#1 | |
|
AF Newbie
Join Date: Jun 2011
Location: Sierra vista, Arizona
Posts: 5
Thanks: 1
Thanked 0 Times in 0 Posts
|
89 Beretta 2.8 fuel injector ohms?
Hey all, it’s me again. after thinking i fixed the problem it still dies after getting to operating temp. So I decided to check the fuel injector ohms. Injectors 1, 3 and 6 are reading 12.4 ohms and 2,4 and 5 read 6.5, 7.3 and 8.9. Would this cause it to die after getting to operating temp. i took the reading warm and cold. When warm the only injector to maintain a 12.4 reading was #6 the rest were between 6.4 and 8 ohms. This is getting old! Also the wire harness seems to be hard and brittle, with one plug spliced, so that i will replace since the plenum is off. Thanks for the help.
|
|
|
|
|
07-10-2011, 01:07 PM
|
#2 | |
|
AF Enthusiast
Join Date: Mar 2004
Location: lindsay, Oklahoma
Posts: 794
Thanks: 1
Thanked 40 Times in 39 Posts
|
Re: 89 Beretta 2.8 fuel injector ohms?
How long since a tune-up? Any applicable trouble codes? Replace injectors. You can do amp test, injector ground at pcm, key on. Should not be more than .75amp.
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
