Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
10-06-2014, 05:45 AM | #1 | |
AF Newbie
Join Date: Oct 2014
Location: jerusalem
Posts: 2
Thanks: 1
Thanked 0 Times in 0 Posts
|
crysler lebaron 1979 vibrations
the car is crysler lebaron 1979 originaly came with engin 318 and i planted a 440 h.p engin 1967 and transmission 727 (i dont know what car the transmission came from.)
i have a slight vibration how can i fix it is it from the turk convector or the poly balance. thaks shimenen. |
|
10-06-2014, 09:58 PM | #2 | |
Nothing scares me anymore
Join Date: Dec 2003
Location: City of Light
Posts: 10,702
Thanks: 12
Thanked 82 Times in 77 Posts
|
Re: crysler lebaron 1979 vibrations
Does the vibration happen when the car is not moving, but the engine is running? Then possibly the flexplate is improperly balanced.
If it happens when moving, then there might be something wrong with the driveshaft angle. Also check The front yoke/slipjoint is proper outer diameter and good spline inside? The output shaft is straight? The tailshaft housing is not warped or cracked? The driveshaft is not bent? The driveshaft is properly balanced? The u joint is properly installed and is not missing ay bearings? The bearing (not the bushing) at the front end of the tailshaft housing is good and properly seated? |
|
The Following User Says Thank You to MagicRat For This Useful Post: |
shimenen (10-07-2014)
|
10-07-2014, 08:35 AM | #3 | ||
AF Newbie
Thread starter
Join Date: Oct 2014
Location: jerusalem
Posts: 2
Thanks: 1
Thanked 0 Times in 0 Posts
|
Re: crysler lebaron 1979 vibrations
Quote:
|
||
|
POST REPLY TO THIS THREAD |
|
|